(Topic ID: 243841)

F14 upper (R) flipper dead


By Pintopia

5 months ago



Topic Stats

  • 8 posts
  • 2 Pinsiders participating
  • Latest reply 5 months ago by Pintopia
  • No one calls this topic a favorite

You

Linked Games

Topic Gallery

There have been 2 images uploaded to this topic. (View topic image gallery).

A2CF3EE2-9C45-4E1E-8CBC-C92DAD41A797 (resized).jpeg
B718A49D-474C-4457-8A92-1DBA0D3693C7 (resized).jpeg

#1 5 months ago

I could use a little help been shopping an F14 got everything working with the exception of the upper right flipper.

Checked power on all the coil lugs matches other coils.

Took a test lead and grounded center lug coil fired.

Checked flipper switch making good contact.

I jumped the blk/Ylw Wire from the switch to the upper lug on the coil and engage the switch still nothing.

Any ideas what I should look at next?

#2 5 months ago
Quoted from Pintopia:

Any ideas what I should look at next?

EOS switch not making contact.

#3 5 months ago

EOS Switch was nasty so I changed it out with a new one (normally closed) also replaced the cap and coil. Still no upper right flipper? all flipper work fine.

#4 5 months ago

Post a pic of the flipper.

#5 5 months ago

Here it is... the blk/blu wires are from the EOS.

A2CF3EE2-9C45-4E1E-8CBC-C92DAD41A797 (resized).jpegB718A49D-474C-4457-8A92-1DBA0D3693C7 (resized).jpeg
#6 5 months ago

I ran a jumper wire from the switch to the coil and it fires when depressing the switch but it’s machine gunning.

#7 5 months ago
Quoted from Pintopia:

I ran a jumper wire from the switch to the coil and it fires when depressing the switch but it’s machine gunning.

Then you have a broken hold winding on the coil and a bad connection on the black/yellow wire. Check the connector that comes off the play field for continuity on the black/yellow from one side to the other side of the connector.

#8 5 months ago

OK problem resolved thanks for all the help. The coil was bad and I had a bad wire from the switched. Both correct and working fine

Promoted items from the Pinside Marketplace
$ 19.99
Eproms
Matt's Basement Arcade
$ 14.00
Electronics
Yorktown Parts and Equip
Trade
Machine - For Trade
Louisville, KY
From: $ 5.00
Cabinet - Other
Rock Custom Pinball
$ 79.95
Cabinet - Shooter Rods
Super Skill Shot Shop
2,300
Machine - For Sale
York, PA

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside