I think I have the piece you're looking for. It's a bit wavy, but can easily be straightened out. There is one small scratch on the lower left side, but it in the black only and can easily be touched up from the back side.

I'll send it to you free of charge if you can help me out with a problem I'm having with my F14.

I already gave both of the slingshot plastics to a fellow Pinsider in California last year.

I'm at my wits ends. It wasn't a long trip to start with.

My F14 will no longer kick out a ball to start the game.

It's running a new Rotten Dog MPU board. I've replaced the snubber board that controls that solenoid and a flasher. I can hear the relay cycling on the snubber when the ball should be kicked out.

I can take the coil to ground any where along the path from the coil, through the diode board to the J12 connector and get the coil to fire.

If i jumper between the J12 connector and the center tab of Q25 i get a weak pulse on the coil.

The game was running fine with the new MPU for a couple of weeks. The problem started when I was turning on all my games to prep for a party.

I'm out of ideas. Anybody out there have an idea of what to check next?

Thanks in advance.

Is this the piece you're looking for?

SDC10720.JPG

Vinny, I'm outta town for one more week.
PM me your address and I'll send it out no charge when I get back.