Hi looking for a pic of a C-11232-1 ac relay I'm not sure if mine is wired correctly
here is a link to google search Your wires are loose.
re soldered them there all good aswell as the relay connections. im thinking there should be a wire on the +28v tag. if you see other pics they do. in solonoid test this does not fire.
Bringing this back from the dead. I'm putting a new playfield in my f-14 and saw this while disassembling. can't find what I'm looking for in the schematics. Can someone post a picture of their c11232-1 relay wiring? It's at the very back and covered by the harness unfortunately but maybe someone has playfield swap pics. Mine doesn't match the picture above, my ground and +28 volt are bridged. Orange makes sense for +28, but don't I need a ground?
Everything seemed to work fine in the game, but there may have been a flasher out I didn't catch
Quoted from PinballTilt:
Mine doesn't match the picture above, my ground and +28 volt are bridged. Orange makes sense for +28, but don't I need a ground?
Yours doesn't match because yours is correct. Orange isn't 28 volts, the Red wires are 28 volts. The Orange wire has 28 volts when the relay is energized, otherwise the Brown wire has 28 volts when the relay is not energized. The ground to operate the relay comes from Q-7 on the CPU board.
Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside