F-14 Tomcat
Williams, 1987You're currently viewing posts by Pinsider iamthelaw.
Click here to go back to viewing the entire thread.
Hello, I’m having the Yarkov kickback, the gate next to it and all of the upper Tom cat standup targets working intermittently, anyone ever have this issue before? The 2 flashers above the upper Tom cat stand upswing look like they are working either but everything else seems to be working as it should. Any help would be appreciated, feel free to text, thanks
Quoted from FLASHBALL:Upon closer inspection, the switches you listed are all in the same column of the switch matrix. You probably have a bad diode or a short somewhere in there.[quoted image]
Definitely something with the green violet wire, looks like previous board work has been done, maybe not too well, gen/vlt is the first post on this clip, thanks for help. Will update soon
50BF13C3-62A8-4041-960C-3376C4A53D53 (resized).jpegQuoted from Iamthelaw:Definitely something with the green violet wire, looks like previous board work has been done, maybe not too well, gen/vlt is the first post on this clip, thanks for help. Will update soon[quoted image]
Definitely something with the green violet wire, looks like previous board work has been done, maybe not too well, gen/vlt is the first post on this clip, thanks for help. Will update soon[quoted image]
Touched up the board best I could and everything is working mechanically still dot have flasher 7 working apparently but will dig into that at a later time, thanks
The two flashers above the upper tomcat targets were typically removed from the machine because they had a lot of issues with the lamp base shorting out on the target brackets.
On my machine, theres not even sockets for these flashers.Still looking into flashers noticed a bad diode on the relay board on the right side of the play field not sure if this was causing some issues or not
The top 2 flashers, flasher 7, aren’t working. Replaced bulbs, went over wiring and flasher board and it all looks good. The rest of the game is working as it should, any suggestions on next steps would be appreciated
Added 14 months ago:Nevermind, they are not on the same circuit
Quoted from topkat:Does anyone have the metal wire guide that is to the right of upper right flipper. The one in mine appears to be short and a previous owner made an extra hole to make it fit . The ball gets stuck on occasion. Please let me know if you this part.
Thanks
This?
4D7BDE7C-6FAF-40F0-9970-FA3746076E8C (resized).jpegYou're currently viewing posts by Pinsider iamthelaw.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/f14-tomcat-owners-club-fans-also-welcome?tu=iamthelaw and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Eau Claire, WI