You're currently viewing posts by Pinsider elliott99.
Click here to go back to viewing the entire thread.
Quoted from Fifty:Does anyone have a logic probe that is willing to buzz out pin 10 and 11 of U49 for me. I'm getting the following in attract mode;
U49
pin 11 - solid HIGH
pin 10 - fast pulsing HIGH
The input is pin 11 is the output is pin 10. My understanding of this IC is that whatever is going into pin 11 should be coming out of pin 10 but that is not happening in my case.
Could someone verify their U49 for me. In attract mode please.
Thank you!
Pins 10 and 11 are both solid high in attract mode on mine. Hope that helps, and sorry it took so long!
Elliott
Quoted from 27dnast:Which versions of ROMs allow for adjustment of the strength of the Yagov kicker? Is it only L1?
L1 does, L4 definitely does not, don't know about anything else!
Elliott
Hi, what exactly am I looking for? Sometimes a ball will bounce the wire gate open from the outside, and enter an already occupied eject. I can see what appear to be a broken bit of spring steel held by 2 screws, presumably the "springs" listed as 01-8615 and 01-8651 in the manual, can anyone post a picture of an unbroken spring, or does anyone know if they are available?
Thanks,
Elliott.
Thanks for the reply Bobukcat, I have replaced the wire gates on both sides, a couple of times now, as they do take a hammering! The 2 screws circled in my picture are holding the broken remains of some sort of flat spring steel item which Williams fitted presumably with the aim of damping the wire gate movement. I suspect these springs are probably broken or missing on most if not all F14s, and as the game plays without them, there has been little interest in replacing them!
Quoted from stumptown:Interesting! I've noticed the same behavior but my F-14 has no sign of that spring on it. The tab and holes are there on the main assembly but they don't look to have ever had a leaf spring installed. If you hunt up a source for the parts I'm sure I'm not the only one who'd like to add those springs on to their machine that lacks them.
Hi, I have trawled the web for close up shots of the playfield, and found a picture of the right hand side complete with spring, but I am still looking for a clue as to what the other side spring looks like.
springs (resized).jpgYou're currently viewing posts by Pinsider elliott99.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/f14-tomcat-owners-club-fans-also-welcome?tu=elliott99 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.