Hey GRUMPY , would the solenoid saver on the 6 special solenoids do the same to protect the diverters as an inline fuse? I believe the saver has 1.5 SB fuses, though

GRUMPY would the 1 amp SB fuse inline that you talked about earlier save damage to the CPU?

I believe Buthamburg is planning another run of playfields.

Yes, coming soon I hear.

https://pinside.com/pinball/forum/topic/demand-check-f14-tom-cat/page/9#post-4810963

SkaterVet you should post to the thread for the playfield. I know he said to let it cure for at least 30 days

https://pinside.com/pinball/forum/topic/demand-check-f14-tom-cat/page/9#post-5095783

Other hardtops have been $298 plus shipping.

Were all the balls in the trough durning that test? Maybe you have a switch shorted to ground? Do all the same switches display on test? Which ones?

There’s no reason that coil needs a fuse. I used the solenoid saver on the diverter coils since a short plunge can cause those coils to stay on too long.

No diodes on GI. I bet broken wire.

northvibe could be diode on the flipper?

BladeFury that was quick! Any tips or suggestions to make it easier? My playfield swaps is a few projects away.. I get a little scared thinking about the work involved.

Mine doesn't go on forever, it does stop and go into other sequences. Not sure why yours will not stop.

amkoepfer CPR does make a mirrored backglass. If a hardtop came out for F-14, I'd go that route and sell my playfied. Here is a link to the thread about the playfields. You can contact him to see when he might rerun them.

https://pinside.com/pinball/forum/topic/demand-check-f14-tom-cat/page/10#post-5557869

GRUMPY is more of a Coke guy

Right inlane to center target when lit advances kill towards yagov extra ball

Isn’t the kicker on the left?

That last picture looks like the start button.

You were able to get the old sleeve out? Which coil is it. Sounds like it is staying on too long.

Wait for the sound after turning on the game.