Completed my playfield swap, and now have the following problems (everything worked prior to swap):
1) When starting a game, ball does not eject, and several solenoids fire. Game does not start. All the switches in the trough work correctly.
2) Lower right flipper does not fire when button is pushed, however, upper right flipper works. I've gone thru the schematics and I can't figure out the problem. However, when I add a jumper (shown in red) from the coil's BLU-VIO wire to the flipper button's ORG- VIO wire, and push the button, both upper and lower right coils fire. From the schematic, there appears to be connections between the coil and the button, but I can't locate these connectors/connections.
3) Lamp column 2 works when I play with the connector and wires between the playfield and the back box. I don't think this is a big problem, but problems 1 and 2 are the concerning ones at this time.
Anyone have any ideas where to start looking. I'm wondering if all the problems are in the connectors between the playfield and back box, but it's pretty straight forward.
flipper jumper (resized).jpg