Hi all. Working on an f-14 tomcat. Had some pretty hacked up wiring. Right now, the third player display is out and the top stuff isn't working. The display I haven't gotten to trouble shoot much beyond reseating the connectors which didn't help. But the headache right now is, after a few hours tracing wires and testing continuity, we finally got our 28vac to the top via the white/blue wires. Not sure if the issue is the relay board or the red/brown wires, but looking for advice on testing and further troubleshooting. The motor is working fine when directly wired to 28vac, I have not seen the lights even flicker yet, but all three test good on an ohm meter and appear visually good. Thanks for any input as usual!