I think those resistors are for the flashers.
Have you checked the switch for the kickback? maybe it's responding on vibrations
You're currently viewing posts by Pinsider pinmario.
Click here to go back to viewing the entire thread.
I think those resistors are for the flashers.
Have you checked the switch for the kickback? maybe it's responding on vibrations
Maybe start with disconnecting the Yagov switch and play a few games to check if the switch is ok (or not), if this turns out Ok, check the connector on the board where the yagov-coil is controlled (maybe a loose wire or bad contact) and then follow the wiring to the coil. I once had a coil wire stuck and damaged near the playfield hinges giving weird faults. If the coil has a diode check it to.
Succes
You're currently viewing posts by Pinsider pinmario.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/f14-tomcat-kill-yagov-misfire-?tu=pinmario and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.