Hi,
My F14 Tomcat is in German, so I did some research, and found out that early system 11 games need to have a jumper installed on W7 for it to be in English. Is this also the case with the F14?
There's me, thinking I need a jumper block like in a computer, but it looks like you need to bridge the two solder points with a wire (and it currently looks like it has been cut off).
I just want to make sure, before I take the board out!
Thanks
I don't have the game, but the manual seems to show that Adjustment No. 51 is English/German.
Looks like no wiring needed.
http://mirror2.ipdb.org/files/804/Williams_1987_F_14_Tomcat_Full_Manual.pdf
Viel Gluck!
Quoted from RCA1:I don't have the game, but the manual seems to show that Adjustment No. 51 is English/German.
Looks like no wiring needed.
http://mirror2.ipdb.org/files/804/Williams_1987_F_14_Tomcat_Full_Manual.pdf
Viel Gluck!
Danke!
Didnt even notice it in the manual. I have yet to receive my LED display (the upper ones are broken), so I currently can't see what I'm adjusting.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/f14-tomcat-is-in-german and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Schagen
St Joseph, MI
Sawston
