F-14 Tomcat
Williams, 1987You're currently viewing posts by Pinsider pinballmaniac40.
Click here to go back to viewing the entire thread.
Quoted from Arcade:No flippers or pop bumper but everything else seems good.
These items still not working? If not, there are a few fuses you need to check that are mounted to the bottom side of the playfield. Hopefully, you have a burnt one.
Far as flippers, check the fuse on the flipper power board to the right of the MPU board. If the fuse is blown, then sounds like the bridge rectifier is shorted (mounted just below the fuse circled in yellow).
Quoted from Arcade:But I will double check the fuse you circled out of circuit first.
The fuse I circled would be for flipper power.
Check under the playfield, there are at least 2 fuses there, one should be near the pop bumpers.
You're currently viewing posts by Pinsider pinballmaniac40.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/f14-switch-help-and-wiring-help-needed?tu=pinballmaniac40 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Vandalia, OH