Set new meter to omega symbol.
I get readings ranging from 5 to 11 on all 6 tabs
The 11 is from the new TIP 102 I installed.
The 122's are around 5 or 6
Good. I will just have to try the board now.
This test is all over the map. Sometimes I get around 1500 and sometimes I get no reading at all.
And oddly enough as I move the meter around the tabs some that were reading the first go round refuse to read anything just seconds later.
Maybe my meters are just poor but I don't trust any reading I am getting with this test.
If the resistance is very high some meters bounce around a lot, but at least its not a low reading which would lock a coil on. I would say you have this board repaired now.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/f14-burnt-coil-and-other-questions/page/2?hl=heavymetalballs and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.