Hi everyone,
I recently put my Baywatch on route after shopping it out. I'm having a problem with the 7A slo blo fuse blowing on F1 of the power supply board. I replaced the fuse with another and it seems to work well for only about a day, then it blows again. What do I need to check that ties into this circuit? The fuse holder looks toasty at one lug as well. Not sure if this matters and would need to be replaced.
The fuse clips could be a problem - http://www.pinwiki.com/wiki/index.php?title=Data_East/Sega#Fuse_Clips
Do you have any burned connectors?
I had a friend replace the fuse holder. He also replaced the rectifier and the male cn8 pins as well. When I went back to installit, I noticed a previous owner had replaced the cn8 female connector and added wire to each existing wire for some reason. I noticed a burnt connector from this handywork. I repinned all with trifurcon pins and removed the addition wiring prior to installation. Everything is good now but time will tell if it will hold up. Hopefully, it will.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/f1-fuse-blows-on-psb-on-baywatch and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Auburn, AL