Does anyone have very detailed photos of the f14? I bought mine it was partly disassembled. Im not sure what hardwhere goes where. Machined vs wood screws in areas. plastic spacer locations..
You're currently viewing posts by Pinsider wes910.
Click here to go back to viewing the entire thread.
Does anyone have very detailed photos of the f14? I bought mine it was partly disassembled. Im not sure what hardwhere goes where. Machined vs wood screws in areas. plastic spacer locations..
Quoted from StylesBitchly:I have an early run machine. No light boards. Many light sockets are soldered to a common ground braid wire, stapled to the bottom of the playfield. I am not going to buy a special stapler. Any suggestions on how to reattach the braid wire?
Thanks
I was looking at it and kinda wondering the same thing....Is a standard out door staple gun like you hand xmas lights with not ok?
I used the post beside it as a guide. I layed a piece of paper on the old pf and traced the 4 holes. Lined up the outer holes with the ones on the new play field and marked the missing holes and drilled them.....If this makes sense...
You're currently viewing posts by Pinsider wes910.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/f-14-tomcat-playfield-swap-club?tu=wes910 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.