F-14 Tomcat
Williams, 1987You're currently viewing posts by Pinsider dozer1.
Click here to go back to viewing the entire thread.
Quoted from Wes910:Does anyone have very detailed photos of the f14? I bought mine it was partly disassembled. Im not sure what hardwhere goes where. Machined vs wood screws in areas. plastic spacer locations..
I don't have my F-14 anymore, but do have teardown pics of it from shopping it out. PM me your e-mail for pics.
You must be dealing with loctite. Not sure if you know what that is, but you need to heat it up first with a soldering iron as close to the threads as you can get. They will come off easily then.
Most people hate loctite. I for one like it. (At least it has it's place)
)
Quoted from damageinc55:I keep blowing the upper playfield GI fuse.
Something to check here. I recently did a PF swap in my Fire. I had a short in 1 GI string. It turned out to be one of my staples very near a GI socket. It was on the hot tab of the socket and the staple angled over and touched the socket ground.
You're currently viewing posts by Pinsider dozer1.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/f-14-tomcat-playfield-swap-club?tu=dozer1 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Sargeant, MN