Hello to all
Just saw this thread now.
We will see if we can change the milling and the artwork for the next run.
We check it on our playfield, we can push the bracket to the front to make it flush.
Regards from Hamburg
Peter
You're currently viewing posts by Pinsider Buthamburg.
Click here to go back to viewing the entire thread.
Hello to all
Just saw this thread now.
We will see if we can change the milling and the artwork for the next run.
We check it on our playfield, we can push the bracket to the front to make it flush.
Regards from Hamburg
Peter
Hello to all
Ours war also missing this wire bar, on 2 playfields. We checked out a couple of F-14s and they had the holes, but not the bar.
We decided to leave the holes away. Bronco-Jon your bar doesnt look right, boths side should be straight.
Regards from Hamburg
Peter
Hello to all
Its not the inserts that are raising, it is the clear coat that is settling.
That is normal. The clear coat is gassing out and schrinks.
The Inserts are very firmly glued.
In production it happens often that we have to take out cracked inserts, we have to break
the inserts to get them out.
Regards from Hamburg
Peter
www.buthamburg.de
You're currently viewing posts by Pinsider Buthamburg.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/f-14-tomcat-playfield-swap-club?tu=Buthamburg and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.