(Topic ID: 72698)

F-14 Parts Availability


By GPS

5 years ago



Topic Stats

  • 68 posts
  • 15 Pinsiders participating
  • Latest reply 5 years ago by GRUMPY
  • Topic is favorited by 4 Pinsiders

You

Linked Games

Topic Gallery

There have been 14 images uploaded to this topic. (View topic image gallery).

xc1.jpg
DSCN3940.JPG
f14-08 (1).jpg
174351.jpg
WilliamsHingePivot.png
f14 Bracket.jpg
f14beaconassembly_zps3481c74f[1].jpg
IMG_0404 [800x600].JPG
IMG_0403 [800x600].JPG
IMG_0401 [800x600].JPG
IMG_0402 [800x600].JPG
Scan-131207-0002.jpg
IMG_0398 [800x600].JPG
IMG_0397 [800x600].JPG

You're currently viewing posts by Pinsider LongJohns.
Click here to go back to viewing the entire thread.

#5 5 years ago

My F14 uses plastic stand offs between the clear and printed plastics. The only place that it has metal stand offs is on the left out lane. Those I found are not available anyplace that I looked when I needed 1 for my Getaway - just ended up cutting some stainless steel tubing and using that.

Here are a couple of quick pictures of the plastic stand offs - let me know if you need anything more:

IMG_0397 [800x600].JPG IMG_0398 [800x600].JPG
#10 5 years ago
Quoted from GPS:

Your second picture shows one of the brackets that I am describing. It is just to the left of the clear dome right behind the ball cage/chute. These are what I am missing. If I could get some closeups that show these, where they are and how big they are I could probably make them.

Ok, gotcha - I should be able to get those, but it wouldn't be until the weekend. But will post them as soon as I can unless Soapman beats me to it.

I tend to refer to stand offs as round posts, I would call those mounting brackets - but what do I know.

#13 5 years ago
Quoted from GPS:

I could concur here. Mounting brackets sounds better. Symantics can screw things up now and then. Thank you.
G

Yea, sometimes pictures are worth a thousand words.

Any event, here are some pictures and a drawing with measurements on them - all measurements are in mm.

Hmm - the "files attached" section is not working for me...

#14 5 years ago

Ok, file attachment section now working for me (???).

Higher-res images (temporarily) can be found here if needed: http://members.shaw.ca/junkuser1988/F14/

Drawing and measurements:
Scan-131207-0002.jpg

There are 3 of these brackets (on the largest piece - "kink" in the longest part):
IMG_0401 [800x600].JPG

1 of the next bracket (no "kink" - sorry best picture I can get without taking it apart):
IMG_0402 [800x600].JPG

1 of this small one:
IMG_0403 [800x600].JPG

Then there is this 1 that connects the 2 pieces of plastic together:
IMG_0404 [800x600].JPG

edit: just noticed that there is another to the left and below the 1 in the last picture - it is 25mm x 25mm with a 90° bend in the center. Sorry about that.

Hope that helps.

#31 5 years ago
Quoted from pinballfan:

you have a plastic playfield protector? did you like it?

So far no complaints - but I also have a couple of coats of clear applied as well to the playfield. Went with the protector just to add that little bit a extra protection. Also got one for my Getaway as well since it seemed to work out ok on the F14.

Didn't seem to affect the game play/speed when compared to without it - did have to adjust a couple of the roll over switches though. I also had to trim it a bit around the top left star post on the left sling so that it was 'centered' better.

It is super shiny though...

Promoted items from the Pinside Marketplace
$ 221.00
Cabinet Parts
Tilted Pinball
$ 14.99
Electronics
PinballElectronics.com
1,700
Machine - For Sale
Pasadena, CA
Trade
Machine - For Trade
Louisville, KY
$ 79.95
Cabinet - Shooter Rods
Super Skill Shot Shop
$ 20.00
Electronics
Yorktown Parts and Equip

You're currently viewing posts by Pinsider LongJohns.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside