I am looking for the best way to access the coil for Gen. Yagov kickback. Is it required to take off most of the ramps and associated connectors of is there a easier approach. I am new at this and when I started a few stopped screw heads caused me to rethink moving forward. I feel either I have a bad coil or a wire feel off. Thanks warren

Thanks for the thought but can not access from below. It is located in the upper left between the lower playfield and bottom of upper playfield

Thanks to you both for reaching out. Switch does fire but does not activate coil. Coil does not fire in test mode. I have checked the program and it is set to fire. Either of you have any tricks on removing small head screws with stripped heads? Thanks