I can't seem to find them in my manual...Thanks
You're currently viewing posts by Pinsider cowman57.
Click here to go back to viewing the entire thread.
Being melted looking I assume they could be part of the reason some flashers don't work, and should all be replaced? How many of each go on the back panel of the PF? I don't want to take it apart to look untill I have the parts to fix it.
Quoted from practicalsteve:Yeah, you are just missing some in the middle of the pic, they must have broken right off.
Nothing laying in the bottom of the cab, but there were some soldered on that board at one time. I'll get some ordered. Half of the red flashers on the PF back panel don't work. Are there some resistors behind that back panel? One more question. By the upper TOM-CAT targets, there are 2 domes with no flashers under them. Have they been removed at some point in time, or are the domes just there for looks?
Quoted from Patofnaud:I had to do that same fix on mine. That first etch gets way too much abuse.
Those 6 back flashers are sharing the resistors of the flashers on the playfield. One trick is you can put all LED flashers on the playfield, and leave those as incandescent, and you do not 'have to' remove the resistors to use LED flashers on the PF.
Never did the LED thing....Are there board modifications that have to be made to power LED's, or do you just pull out the incandesents, and install the LED's?
You're currently viewing posts by Pinsider cowman57.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/f-14-flasher-resistor-value?tu=cowman57 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.