Did you repin the connector on the MPU? The first digit should always be 0. Looks like you are off by a pin on the digit select wire.
You're currently viewing posts by Pinsider BigAl56.
Click here to go back to viewing the entire thread.
Did you repin the connector on the MPU? The first digit should always be 0. Looks like you are off by a pin on the digit select wire.
Quoted from slghokie:I have the exact same issue on an Eight Ball. I checked the J1 connector, pushed pins in and checked wires but that did not change anything. Is it strictly a repin to fix this or could U20 or another chip be bad on MPU?
This looks to me like the digit select pins are off by one and need to be shifted over.
You're currently viewing posts by Pinsider BigAl56.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/evel-knievel-display-issues-all-incorrect-digits?tu=BigAl56 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.