You're currently viewing posts by Pinsider kenlayton.
Click here to go back to viewing the entire thread.
Quoted from ForceFlow:Did they come out like that? I've never seen that before.
I always rise off the parts after removing them from evaporust. I'm guessing you just removed them at let them dry?
That's what I'm thinking. He didn't rinse the parts off as soon as he took them out of the Evapo-Rust and simply let them dry.
What I do for small metal classic Stern parts is to use C-L-R instead. Mix the C-L-R solution up weak with water: 90% water and 10% C-L-R. Soak the parts in that for about 15 minutes and KEEP AN EYE ON THEM. They should turn silvery bright again. If they start turning black or dull then you're leaving them in too long.
C-L-R must be rinsed off the parts immediately when you pull them out. Also, after that rinse, spray the parts with Mean Green or Simple Green and rinse again. This halts all further action of the C-L-R.
You're currently viewing posts by Pinsider kenlayton.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/evaporust?tu=kenlayton and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Olympia, WA