I'm picking up a Embryon tonight !! There are a few spots with playfield wear but hopefully a now one comes around or somebody makes some.

Does anyone know what silver I can get to touch up some bad areas on the head & cabinet? Thanks for all of your posts.

Thanks Hellfire. Do you touch spots on your pf or just leave it?

Here's a picture.... Can I join the Embryon Club?

I was in a rush & forgot to pull the wires up from the cabinet before bolting it on!

IMG_20140609_215637361.jpg

Just wondering..... the Embryon playfield is pretty dirty. Is the best way to clean still with Simple Green... Magic Erasers with little alcohol & Novus 2?

Just wondering what you have your Embryon angled at?

How do you adjust the amount of sound... not volume. There doesn't seem to be as much chatter going on as in some videos I've seen/heard. Is it the dip switches? Thanks

Ok... when I press the small bump inside the coin door to Denver 18 and then hit the credit and free button nothing happens.

Ok... when I press the small bump inside the coin door to enter 18 and then hit the credit and free button nothing happens. I know I need a manual.

I sure wouldn't mind having this original Embryon art hanging by my Embryon pin.

ebay.com link: Original Factory Artwork for Ballys 1982 EMBRYON Pinball Machine

I have seen some nice looking Embryon's with LEDs. Does anyone make a kit for this game?

bump.... thanks for Embryon LED ideas...

Awesome.... I'll be ordering a set this spring.

Thanks for asking about a repro Embryon pf. I could use one myself.

Also... a couple of my upper plastic pieces are warped & 1 is broke (clean line) in the center. Can this type of issue be repaired w a heat gun & super glue?

nudge...

The displays on my Embryon do not light up. Any ideas what I should check? Thanks

Thank you.. I'll try this when I get home..

My 1st Embryon I started using freeze spray & art was coming up... I then used a heat gun... holding it about 5 inches from mylar & lifting slow... worked super.

I can't tell if my Embryon is in a test mode or if something is very wrong. If there is a ball in the troft.. I can press the red button on the inside door & the different solenoids will activate.. if I press again.. the display goes through a test.. sometimes if I press the right flipper the right sling will activate. Any help would be appreciated.

Yes.. I have that issue also.. at times if I press the right flipper the left popper will activate over & over... hmmmm

Just curious if anyone knows if Tony Ramunni attends any shows? Is he still with us?? I can't find much on Google on him. He's my favorite pinball artist next to John Youssi.

Can you post some pictures of Titan competition rings you've installed?

I am thinking of doing clear but not sure if clear would look right on the flipper bats.

Would anyone know which star rollover size or type I would need for the circled bad 1? Thanks

20231124_132741 (resized).jpg