Salem, OR
Love mine, picked it up for $300 3 years ago. Replaced a rectifier, cleaned up the main board & it works fine.
Great game!
(Topic ID: 65974)
You're currently viewing posts by Pinsider dasvis.
Click here to go back to viewing the entire thread.
2 weeks later
1 month later
3 weeks later
1 month later
1 week later
2 weeks later
3 months later
1 month later
1 week later
1 month later
Coil could have a broken low power winding. If it is "machine gunning", then typically that's what it is. Normally they break right where the low power winding wire attaches to it's lug & you can just carefully unwrap it one turn, sand off the insulating varnish on the end, & re-solder to the lug.
If the low power winding is broken the coil will behave as it should thru the high power windings -- but when the EOS switch opens & power is sent to the low power side of course it just falls back & closes the EOS switch, thus endlessly cycling the flipper coil.
Quoted from Pinwiz1985:Everyone, Brian at HSA has completed my PF. I invite everyone to please help me look over the before and after pictures. Just spent 20 minutes going through them and so far I cannot find any major inaccuracies of the artwork. So far I am VERY IMPRESSED!!!!!!
http://www.hsapinball.com/HSA_PINBALL/hsa92214embryon.html
What was the cost on this job?
Quoted from ghostbc:Does anyone know if there are any small overlays available with the art work on them for the usual worn area's like the top where the ball enters the playfield ? If so where should I look. I just got this game and put 7 digit display's in it.
Yeah, it really should have had 7-digit displays from the factory. Debating if I want to do that to mine or not.
2 months later
3 months later
Quoted from Stu:Ok guys ( and gals )......We are now ready to announce that we have released our new Embryon Plastics.....
Stu - I see on CPR's website that you guys now have a 50" sander. Big enough to do the widebody playfields. Any plans to reproduce Embryon to go along with these plastics?
1 week later
5 months later
1 month later
10 months later
1 year later
1 month later
4 weeks later
4 months later
Quoted from TooFiddyMan:Maybe its on here somewhere but, why did the play field wear so bad on the inserts up in the right top corner? Seems like there is a lot of area that the ball could go other than just over the yellow multiplier insert.....just curious if anybody knows of a reason other than the obvious high traffic area....
[quoted image]
Super common wear area on Embryon.
It gets a LOT of action up there. Loose & or sunken inserts are the main culprit.
11 months later
Quoted from classicgamefan:Yes, those original Embryon concept / backglass artworks have been getting relisted for several months. Would be very cool to have, but I can’t justify the prices myself. For future historical reference, there is a $4000 BIN for the backglass artwork and $680 for the playfield concept art.
Correction - several YEARS they have been relisted
2 years later
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider dasvis.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
