You're currently viewing posts by Pinsider 80spit.
Click here to go back to viewing the entire thread.
After seeing Pinwiz's playfield come back from HSA, I emailed Brian and he's going to do mine, spent all of black Friday tearing mine down. I am honestly feeling a bit overwhelmed, what a pile of stuff to tear down, I labeled everything and took about 150 pictures of it. Hope it all goes together again!! I am
really looking forward to seeing this pin come back to it's original beauty. here's some pics
Monday it's off to HSA
P5040094.jpgP5040095.jpgP5040097.jpgP5040098.jpgP5050131.jpgP5050132.jpg
Quoted from Pinwiz1985:You did a lot of work! You unsoldered all of the CPU lights underneath. I did not do that. I was too scared that I would not resolder the wires correctly.
Best of luck!
I numbered every light and numbered the playfield, Then I found out HSA like to sand and paint the bottom, so I took a load of pics of my numbered playfield, I should be ok. It amazed me how many bad breaks there were in my stapled strand of wire, and jumpers that were installed to fix them.
I can't seem to find any of the old bally lamp sockets, I will need a few new ones. probably just use the newer style. Whats the deal with LED's, Alltek lamp driver board, guess I am going to be in on that too.
Next is rebuilding the flippers, my pawls are shot wish I could just find the nylon part that's all that really wears.
Quoted from Hellfire:I usualy replace all the 555 sockets when I restore one of my machines (see pic) If you need some of the originals get a hold of me i have boxes full of ones i have stripped off other playfields.
922251_608809345796170_876667331... 135 KB
Hellfire, thats a beautiful job, I am impressed, what kind off tape is that that you are using for
the lights, I have not seen that before, neat, no staples, I'm figuring you put a 470 ohm resistor
across all the sockets, and can use the original light board with LED's. Do you have a picture of the whole playfield with the tape pattern, I am thinking of going this way also
Geeze this pin is turning into a Money pit, but I love it!!
You're currently viewing posts by Pinsider 80spit.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/embryon-owners-club-fans-also-welcome?tu=80spit and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.