Hello
Working on a Bally Gator 69
I noticed an Extra Mystery Wire (see pics) that was run out to the MB #5
So I traced the Wire up to the playfield and sure enough it goes to the MB#4 Mushroom Bumper PF Switch
So when you operate either MB 4 or 5 but Shares The MB#5 Relay (normal operation from 5 sw and hack from 4 sw)
I cut the extra wire that was run out from the MB4 playfield switch to MB5 relay to make game back to factory specs and the MB4 Playfield Sw does not make the MB4 Relay Fire as it should
So I’m assuming it broke years ago and this was a quick fix ...
However after looking
I can manually engage the MB4 relay and scores etc but the playfield Sw does not operate its relay
How do I test one of these 3 lug small size coils ?
All switches are clean and properly adjusted - the extra wire had most likely Been here for 20yrs or better but I want the game to work correctly
Thank you
B4A4D166-6F06-46D6-8548-E636A8FAD748 (resized).jpeg
0E2ACEE0-B296-4721-B24C-8EDEFDA852A7 (resized).jpeg