Quoted from Pafasa:Ok, so you three who wish you had a C37....I would like your opinion. My playfield is near perfect as far as paint goes, but the inserts are faded and cupped. Faded is not such a big deal to me because colored led's can handle that. Cupped however drives me crazy. I can't stand seeing the ball change direction on its way around. So here's the question. Would you like it more or less as a potential buyer if I had the pf surface leveled and cleared? And possible new inserts too.
Pafasa:
My High Hand is like that, the inserts are cupped. At 3 degrees pitch it is very noticeable.
After I raised the rear legs almost to the top of the levelers (about a half inch remains), made sure flipper EOS switches and cabinet switches were perfect shiny and clean as well as all other flipper components being in order and correcting the return spring tension so not too taught, I high-tapped the transformer.
The game plays fast enough now to overcome the effect of the cupped inserts, and they are not at all noticeable unless of course the ball is rolling very slowly, which doesn't happen too often anymore. I am no longer considering that I need to clear the pf of replace or repair the inserts.
Dan