You're currently viewing posts by Pinsider emsinkc.
Click here to go back to viewing the entire thread.
I've never had any issues of any kind from high tapping a game. But I don't care too much for the yellow dots. Just too powerful. I put them on a Big Indian one time, those drops up at the very top seemed to be asking for them. I was getting glass at the top of the playfield, they were just too powerful. The orange dots are better but it will be a game by game decision on those.
Quoted from StratDoc:Resurrecting this just for advice.
I have been working on a Gottlieb Hot Shot. Everything working, but flippers even after rebuild weak - normal coils, proper EOS spacing, spring tension good. I decided to high tap the pin. What a world of difference. Flippers and slings not overpowering but certainly a much more enjoyable game. Prior to setting voltage to high tap I could barely get a ball to the top of the pf and the slings just bounced the ball between the two.
I checked the schematics and no bulbs are on the right side/coil side of the schematics so am I safe to assume that all bulbs are running off 6v? I don't really see a difference in bulb brightness with high tap.
If there are any on the 24v side they would have a resistor anyway. I would not worry about it. The only time this issue comes up is a 24v resistor bulb is specified and a 47 is used instead of a 44
You're currently viewing posts by Pinsider emsinkc.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/em-high-tap-poll?tu=emsinkc and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Kansas City, MO