Quoted from Nikrox2:Found this at a local antique store. Contact info show on photo if needed
[quoted image][quoted image]
Worth $40 with or without the internals. I wonder if it's empty or not.
I can go by and verify, close to the house. If anyone wants or needs it, let me know. I'll go and secure it for you. Hold it for pick up if needed. Just hate to see something like that go to waste!
Quoted from Nikrox2:I can go by and verify, close to the house. If anyone wants or needs it, let me know. I'll go and secure it for you. Hold it for pick up if needed. Just hate to see something like that go to waste!
No need to do so on my behalf, but thanks for offering.
Hey y'all, I'm looking for an early 70s Bally EM backbox (for 1973 Time Zone, but any from that era is acceptable, I'm painting anyway).
I don't need glass or guts (unless you have a really nice glass!) just the bare cabinet.
Finally repopulated the playfield today, so this project is back on my bench and I wanna finish it.
Preferrably somewhere near Central Florida?
Thanks!
20210215_163550 (resized).jpg
Howdy.
I’m looking to buy a backbox/head for a 1970 Bally single player. No “guts” or game specific parts needed. Just a solid box. Needed for trip drive
If you have one- pm me? Happy to pay for shipping of course
Thx
Pete
Looking for a later Gottlieb 2-player head with reels and guts, not sure what years are the same, for homebrew project so no particular machine, but a Gemini backglass will be going in it.
Below is an ad for two EM cabinets, no heads. I figured that someone might have the same heads, or one's that are similar and get these two parts games working.
Parts games, missing heads
Gaucho
Bank a Ball
$200 for both
Brookfield, MA
https://m.facebook.com/groups/630406413802349/permalink/1872945002881811/
I found this for sale (not my sale)
Lady Luck
Williams em
$100
Reading PA
https://m.facebook.com/groups/840783619322597/permalink/3890723404328588/
Quoted from Iwasthebruce:Hey y'all, I'm looking for an early 70s Bally EM backbox (for 1973 Time Zone, but any from that era is acceptable, I'm painting anyway).
I don't need glass or guts (unless you have a really nice glass!) just the bare cabinet.
Finally repopulated the playfield today, so this project is back on my bench and I wanna finish it.
Preferrably somewhere near Central Florida?
Thanks!
[quoted image]
Not exactly an EM pinball machine, but it was recommended that I post here for any possible leads or assistance. Looking for a 1984 Gottlieb Touchdown head. This is the “thin” head when Premier took over Mylstar. It could be a project head if available. I could alternately use any of the following 1984 Gottlieb title project heads: Alien Star, The Games, El Dorado City of Gold, or Ice Fever, as they were released after Touchdown. If anyone has any leads, please send me a PM. Thanks for your help and assistance.
Quoted from Jets_1479:Anyone have a gottlieb big top head available?
That's a tough one. I did see one for sale once a couple of years ago. I think the guy was on some kind of island off of Ohio in Lake Erie. I believe that it was listed on eBay. Anything is possible though. I once needed a head for a "Pleasure Isle", and eventually one turned up for me!
Quoted from jrpinball:That's a tough one. I did see one for sale once a couple of years ago. I think the guy was on some kind of island off of Ohio in Lake Erie. I believe that it was listed on eBay. Anything is possible though. I once needed a head for a "Pleasure Isle", and eventually one turned up for me!
Things do happen. I have the head to a Strange World with no cabinet. Last month found a complete cabinet.
Quoted from Playdium:I have the head to a Strange World with no cabinet. Last month found a complete cabinet.
And while we're on the subject. I had a complete Neptune lower cabinet and a couple
years later I found a head 16 miles away. The numbers didn't match, so it was from a
different machine..
Quoted from Mopar:And while we're on the subject. I had a complete Neptune lower cabinet and a couple
years later I found a head 16 miles away. The numbers didn't match, so it was from a
different machine..
Well, because the numbers didn't match I hope you passed on it.
Quoted from Playdium:Well, because the numbers didn't match I hope you passed on it.
You know, there's a little story behind it.
I use to trade digitals that I got in to a Pinball Friend for EMs.
I was over to his place (16 miles away) making a trade, and I
saw a head in the far corner with no backglass. I didn't think
much of it. Then 2 or 3 weeks later out of nowhere it just dawned
on me that that was a Neptune or Hit the Deck Head. He didn't
know what it was so I loaded up a digital head I had in the barn,
went over to his place, gave it a look and sure enough.
I think that digital head I picked up in a lawn a few roads away
for $40.00. so either way I would have traded, but was very pleased
when I saw the head didn't have a Replay reel..
Back in post#239, Vince Veary said he needed a head for Bronco and I PM'd him about one I had. Today, that head got transferred, and now one more EM game is made whole. For those of you who doubt that this topic could ever work, here is some proof that a head will sometimes be united with its corresponding body. Be patient, and you just might be rewarded!
.................David Marston
PS: If you have the "Pleasure Machines: A History of Pinball" documentary, you'll find both Vince and me in the closing credits. Small world.
Quoted from firepowerfixer:I have an extra dealers choice head. Decent backglass
I had an extra one once too, but with no backglass. I gave it away to a friend.
Quoted from dmarston:Back in post#239, Vince Veary said he needed a head for Bronco and I PM'd him about one I had. Today, that head got transferred, and now one more EM game is made whole. For those of you who doubt that this topic could ever work, here is some proof that a head will sometimes be united with its corresponding body. Be patient, and you just might be rewarded!
.................David Marston
PS: If you have the "Pleasure Machines: A History of Pinball" documentary, you'll find both Vince and me in the closing credits. Small world.
Speaking of, thanks to this OLD post in this thread I found a head for my Target Alpha!
Quoted from 890khz:Hello, I'm located in Michigan, and have the following heads available (no backglasses).......
Gottlieb "Lite-A-Card" [1960],
Gottlieb "Target Alpha" [1976],
Williams "Yanks" [back door present] [1948],
Williams "Straight Flush" [missing credit wheel, due to add-a-ball configuration ?] [1970],
Williams "Soccer" [1964].
I'm looking for a complete light box (Backglass is optional) for:
Gottlieb "Dimension" [1971],
Gottlieb "Stock Car" [1969],
Gottlieb "Jungle King" [1973],
Gottlieb "Pin Wheel" [1953],
Gottlieb "Big Indian" [1974].
I'm looking for a complete cabinet (and playfield) for:
Gottlieb "Gold Strike" [1975].
Will be picking it up at Allentown, pretty excited!
Doubt it will ever come up, but I also need a head for Mini Pool!
I still have a very beat-up Aztec head should one ever need it.
There has been some Bank-a-ball action on this thread. I just came across a complete lower cab for this game in Warren OH if anybody has a spare head. I'll see if I can get it to Allentown. Id buy it just for the posts...
Quoted from pinhead52:There has been some Bank-a-ball action on this thread. I just came across a complete lower cab for this game in Warren OH if anybody has a spare head. I'll see if I can get it to Allentown. Id buy it just for the posts...
What’s the playfield like? I might be interested. Mine is alright. You can have all the posts you want Ken.
Quoted from Murphdom:What’s the playfield like? I might be interested. Mine is alright. You can have all the posts you want Ken.
you going to allentown?
Quoted from Murphdom:What’s the playfield like? I might be interested. Mine is alright. You can have all the posts you want Ken.
It's actually a "Flipper Pool".
Quoted from pinhead52:tomorrow[quoted image]
This looks like hell! Those poor playfields strewn about!
Quoted from Isochronic_Frost:This looks like hell! Those poor playfields strewn about!
yes, this is the graveyard..
Quoted from Murphdom:Thanks for checking but I’m going to have to pass on that one.
yea and all I want are the posts... Whats the going price, $3 each for a set for a set of 40?
Quoted from pinhead52:yea and all I want are the posts... Whats the going price, $3 each for a set for a set of 40?
Someone will probably want the plastics and maybe the apron if it’s decent.
Looking for a trashed or semi-trashed Keeney Poker Face... or ideally just need the body, extra if the plastics are intact... could pick up in A-town.
Quoted from illawarra92:on mr. pinball - wasn't someone chasing this?[quoted image]
Same guy giving up, maybe?
no the guy is moving, has a rather large collection of games in his warehouse so he is selling. I purchased a complete palooka, and this big top cabinet from him. So I am trying to locate a head for the cabinet. We s is a really good and fair guy.
Quoted from jrpinball:Same guy giving up, maybe?
Quoted from Jets_1479:no the guy is moving, has a rather large collection of games in his warehouse so he is selling. I purchased a complete palooka, and this big top cabinet from him. So I am trying to locate a head for the cabinet. We s is a really good and fair guy.
yea i bought a hurdy gurdy from him as well. bob h got a rough surf champ
Pasted from Mr. Pinball... I had a great transaction from Wesley in the past, ...
1966 Williams 8 Ball complete head with a 9 backglass. Head paint is an 8, this is a very fine glass. I just don't have a body. $250 for the complete head or same for the glass. Pics available.
Contact:
Wesley Goodin
voice: 972-268-2252
4002 Shiloh Ct.
Midlothian, TX 76065
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/em-heads-needed-heads-available/page/6 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.