Quoted from bluespin:There’s a project with a pos playfield in NH.
https://www.facebook.com/marketplace/item/319334755896727/
Pictures don't do that game justice - it is trashed.
Alberto
Quoted from bluespin:There’s a project with a pos playfield in NH.
https://www.facebook.com/marketplace/item/319334755896727/
Pictures don't do that game justice - it is trashed.
Alberto
Quoted from bluespin:There’s a project with a pos playfield in NH.
https://www.facebook.com/marketplace/item/319334755896727/
Thanks. I think this machine went down with the Titanic.
Bumping this thread to the top since I'm looking for a Sea Jockeys lower cabinet and playfield along with a backglass. I've got a head with the running unit along with another running unit still in it's crate but thats as far as it goes. If you have any leads let me know.
Thanks,
John
Quoted from hazmat7719:I have these empty heads available in Maryland area (Baltimore / DC). Make an offer. One has been repainted. A few have some woodwork needed.
[quoted image]
What in the sweet Jesus?!?
Quoted from Murphdom:Anyone need a Strange World head? There is one up for auction.
Where?
Quoted from Isochronic_Frost:What in the sweet Jesus?!?
They were included in a bundle.
Quoted from hazmat7719:They were included in a bundle.
I don’t see why someone even bothered stripping the heads like that and kept them. Most people who go to that extent just throw them out.
Hopefully they can be reused someday!
Anyone have a Bally cab that would work for Wizard? If not I'll just have to do some reconstruction work.
Quoted from EMsInKC:Anyone have a Bally cab that would work for Wizard? If not I'll just have to do some reconstruction work.
I have a Wizard head cabinet, it is posted earlier in this thread. I am located in Maryland if you can pick it up.
Quoted from hazmat7719:I have a Wizard head cabinet, it is posted earlier in this thread. I am located in Maryland if you can pick it up.
I appreciate that but I need the main cab. The head on mine is fine. They used particle board for the back panel and years of setting it on its back and being dragged and dropped etc has chewed that panel up. The bottom where the bottom panel fits into the groove is pretty much gone and the left side as you look at the back is chunked out pretty good.
When I'm king for a day I'm banning particle board and wafer board. The stuff is shit. MDF isn't much better.
I'll probably have to make a new back panel and rest assured it will be plywood.
Quoted from EMsInKC:I appreciate that but I need the main cab.
Not mine but do you know anyone in TX?
Free em cabinet (not my ad)
Rochester, NY
rochester.craigslist.org link
Me: Can anyone identify the cabinet?
Quoted from bluespin:Free em cabinet (not my ad)
Rochester, NY
rochester.craigslist.org link
Me: Can anyone identify the cabinet?
Sent it to Bruce and he just got this, 5 minutes from his house!
Complete Gottlieb Kings and Queens Head
ebay.com link: GOTTLIEB KINGS AND QUEENS COMPLETE PINBALL MACHINE HEAD Wedgehead 1965
Quoted from bluespin:Free em cabinet (not my ad)
Rochester, NY
rochester.craigslist.org link
Me: Can anyone identify the cabinet?
We'll never know!
Quoted from pinhead52:and finding those score reels
https://www.ipdb.org/showpic.pl?id=1662&picno=43008&zoom=1
Steve Young can help with the score reels for Neptune. I may have a ball count unit that would work.
Looking for a mostly complete head for Williams Firepower. Not necessarily concerned about the backglass or the boards ...they would be a bonus.
Quoted from jrpinball:We'll never know!
It’s a Williams EM. That’s all we can gather. Anyone recognize the art?
50502AA8-25C1-4380-8FCD-C6EE5862EE82.jpeg65D23353-D757-4DF1-B971-C3B27FE2A3E4.jpegLooking for an empty head that'll fit a 1973 Bally Time Zone...mine was eaten alive by termites and I'd prefer not to build a new one if I can help it.
Don't care about paint, I'll be sanding and painting fresh!
Thanks in advance!
Quoted from 1stpinballdave:Looking for a mostly complete head for Williams Firepower. Not necessarily concerned about the backglass or the boards ...they would be a bonus.
They made an EM version of Firepower?!!
Quoted from 1stpinballdave:Looking for a mostly complete head for Williams Firepower. Not necessarily concerned about the backglass or the boards ...they would be a bonus.
You should probably post in this forum.
https://pinside.com/pinball/forum/topic/ss-heads-and-cabinets-needed-heads-and-cabinets-available#post-5817066
#aztec
Coffee table alert
https://www.facebook.com/marketplace/item/710889306436075/
X-posted in the projects thread
Quoted from Isochronic_Frost:It’s a Williams EM. That’s all we can gather. Anyone recognize the art?
[quoted image][quoted image]
Satin Doll
Quoted from EM-PINMAN:Complete Gottlieb Kings and Queens Head
Now $400.00.
ebay.com link: GOTTLIEB KINGS AND QUEENS PINBALL MACHINE HEAD Wedgehead 1965
Little Joe
Bally em
Complete head with backglass
$125
Akron, oh
akroncanton.craigslist.org link
Wanted: Early 60s GTB single player empty head. Specifically, for Flipper Parade.
Assuming any of the Flipper series or other similar vintage heads would fit.
alex
Looking for a donor cabinet/head for Bally Capt Fantastic. We had a terrible flood here several years ago and I'd love to restore this machine I pulled that sat with body underwater for over a week. I plan to sand and repaint, so just need a body/head that will match. Any leads are appreciated!
Quoted from AlexF:Not sure what the chances are of matching this one up with a lower cab. Anyway my wife spotted this 1940 Genco Dude Ranch head at an antique shop in Oconomowoc, WI. $95
[quoted image]
Mine has a head, but dang...I don't think I could have passed it up anyway if I saw it!
Was it gutted?
Quoted from pacmanretro:Mine has a head, but dang...I don't think I could have passed it up anyway if I saw it!
Was it gutted?
You have one? No idea if it had internals. My wife wouldn't think to look.
Quoted from AlexF:You have one? No idea if it had internals. My wife wouldn't think to look.
Looking back at how long it's been in my to do list...I really should get in it when I'm done with my current project. Lol.
Yeah, I'm not even sure what I may wind up needing, if anything.
Cool to see that head out there, though. Just to see some Genco floating around.
Post 65
https://pinside.com/pinball/forum/topic/genco-owners-club/page/2
Wanted: Back Box for Gottlieb Bronco. Don't necessarily need backglass. Ideally this would be located in the Northeast, I'm in Mass. Alternatively, I would be willing to sell a nice complete Bronco body and playfield. Let me know what you got or if you're interested. Thanks!
inbound7418707307920116733 (resized).pngHave a Wms Honey head, would need some work and to be repainted. Would donate to someone who needs it.
I found this for sale (not my sale)
300 head only
Gottlieb em
Portland, OR
portland.craigslist.org link
Quoted from bluespin:I found this for sale (not my sale)
300 head only
Gottlieb em
Portland, OR
portland.craigslist.org link
Yea, but it's located in Riotville.
Williams Darling lower cabinet
Free
Fort Pierce, FL
https://m.facebook.com/groups/299213816922644/permalink/1725844477592897/
Sure Shot head with backglass on facebook... Old Bridge, NJ
https://www.facebook.com/marketplace/item/173462077751643/?ref=search&referral_code=undefined
Woodrail heads available:
Gottlieb Guys and Dolls
Williams 3D
Casper, Wyoming
https://m.facebook.com/groups/840783619322597/permalink/3644770488923882/
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/em-heads-needed-heads-available/page/5?hl=damoib and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.