You're currently viewing posts by Pinsider terryb.
Click here to go back to viewing the entire thread.
Reverse both ends of the ribbon cables and see if the problem changes.
Or you could try moving the cable around and tugging on the cable near the connectors to see if that causes the problem.
Inspect the solder joints on the connector's male pins.
Reseat any socketed IC's relating to the DMD.
You're currently viewing posts by Pinsider terryb.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/elvis-tech-help-display-keeps-freezing-up?tu=terryb and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Banning, CA