AC/DC (LE)
Stern, 2012
AC/DC (Premium)
Stern, 2012
Elvis
Stern, 2004I have two shaker motors, both are 502-5027-00-84, one purchased for Elvis and the other purchased in a bulk deal, and neither have a bundle of wires/adapters as you might see online. I do not have a 7 pin plug that the board requires, can anyone tell me if this is stock in an AC/DC Premium, and I just can't find it, or is there an adapter?
Not sure what you mean by a bundle of wires. The motor requires two wires to go to the control board, a control board, and from that two wires, one for power and the other to the driver that drives the shaker. There's no bundle of 7 wires. Perhaps you should photograph what you have. Basically all data east/Sega/stern shakers are compatible
Not 7 wires, 7 pin connector. The board in the kits have a 7-pin .156 header, which something plugs in to. The instruction sheet says
"Find the 7-pin connector (labeled to plug in to Shaker Motor Board) in cabinet (same area), plug in to J1".
No connectors in my game are a 7 pin connector, nor is anything marked.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/elvis-shaker-motor-in-acdc and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
St. Joseph, MO