Best art on pinblades for this tittle/ anyone?
You're currently viewing posts by Pinsider wcbrandes.
Click here to go back to viewing the entire thread.
Quoted from Hayfarmer:Tilt graphics on mine, much better than sterns ,I think. Personal opinion
Like these ones as well but how do the colors work over all? Any pics ? Cheers
Quoted from BallyKISS1978:I am going with these art blades when/if I get it.
[quoted image][quoted image]
These look so fluid with the art work Thanks!
Quoted from Hayfarmer:Sorry pics are with glass on, I dont have room to get glass off until guy comes and picks up ghostbusters
[quoted image][quoted image][quoted image][quoted image]
Thanks those match playfield pretty well from what I can tell? the ones from Europe, landed here in Canada are getting close to $200 which is a little steep!
Quoted from fuseholder:Incredible Mod! Thanks Brian!
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
where do I get this mod? want both and those eyeballs are pretty cool as well!
Anyone know who does the mod for the scoop that shoots across the playfield to hit trunk stand ups? Without having to go through whole thread!
just going to update machine from 1.01. to 1.02 . Can some one confirm there were three files to upload onto a USB ?
trying to search however I will ask here. Has anyone had an issue of the crypt skull getiing caught up when its suppose to be level with playfield? comes about 2/3 way down and gets jammed. Motor ok it seems after taking roof off crypt the two black plastic pieces are binding? Anyone have a quick fix? Cheers
Quoted from javagrind888:I installed the Pyle speakers and they are SO much better than the Kenwoods. Only $22 too!
way better and changing out other games as well! The highs are soooo much more clear and precise!
Does anyone have a definitive fix for the Crypt skull head when coming down to appear, gets jammed before seating entirely. I took crypt apart and it's the part after spring which catches the metal and gets jammed there which is plastic.
Quoted from Rob_G:Where is it sticking? The carriages may have a slight flaw which can cause a sticking issue. Stern sent me a replacement carriage, but it still had the same flaw.
As the skull is pushed forward, the font of it is also being pushed down somewhat because the back part is being pushed up and forward. The bottom of the skull slider bracket can catch on the edge of the slider cutout as shown in my picture. Try filing the square leading edge on the slider plastic into a more rounded shape so it won't stick on the metal egde.
Even a new replacement slider plastic will get stuck on this. I spent a lot of time on this trying to figure the best solution.
Rob [quoted image]
Yes this was my first though but after further investigation and taking apart the crypt the problem lies in the back of the skull behind where the spring is. There is a plastic end that slides up and down a metal brace and it has a little cut out it seems to catch on. Perhaps you mean it's catching back there because the skull isn't coming forward enough?
Quoted from Rob_G:I think there's a few different possibilities where it can 'stick'. Can you post a pic of this 'cutout'?
Rob
Pm sent
This is where it's getting hung up. You can see the head screw that the spring and skull etc is attached to. When this comes down the metal edge the bottom of that head screw is getting caught up on the guide and if you see any jerky movement and in my case, as seems protruding quite a bit, it totally gets caught up here.
20210425_160104 (resized).jpgYou're currently viewing posts by Pinsider wcbrandes.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/elvira-s-house-of-horrors-the-owner-s-club?tu=wcbrandes and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.