Can I join the club if I only have the topper and shooter rod? lol
I plan on getting the game but don't have space at the moment. I had FOMO with the topper and ordered one so I know that I will have one when I get my game.
You're currently viewing posts by Pinsider gotfrogs.
Click here to go back to viewing the entire thread.
Can I join the club if I only have the topper and shooter rod? lol
I plan on getting the game but don't have space at the moment. I had FOMO with the topper and ordered one so I know that I will have one when I get my game.
Quoted from DVDA:FYI. stern is bumping the price of Elvira HOH and BM66 by $500.00
need to decide on keeping my order or canceling. any advise would be helpful
I just got the same news from my distributor. This even applies to existing orders that have not yet shipped. =(
Quoted from DVDA:FYI. stern is bumping the price of Elvira HOH and BM66 by $500.00
need to decide on keeping my order or canceling. any advise would be helpful
If everyone would cancel we could take control of this price increase craziness but I know that is not happening so I am keeping my order.
Quoted from mpdpvdpin:EHOH most definitely costs Stern more to make than most other premiums. 4 ball lock mechanisms (most games have one) Two Motors (most have zero) Lifting ramp, rotating deadheads door (not other games had this) Advanced Color changing spotlights in three areas, two diverters, entire house toy...man...the list goes on. They spared no expense on this title.
Actually they did, they removed a ramp that was originally in the design.
I got a UPS shipping notification from Stern today and was all excited it might be my topper but then I noticed the weight was only 1 lb, it is probably my shooter rod. Hopefully the topper and actual game come soon.
What are your thought on adding a shaker motor to this title? Do you have one on your machine? Most of my other games have one and I am thinking of ordering one from PinballLife for $80.
Quoted from Hayfarmer:" Bird in the hand", good idea to grab one. I only use stern shakers, well integrated into this game. Worth the money, along with Medisinyl mods.
Thanks for the info on Medisinyl mods. I had not seen those. They look great and I am now on the list!
I got my shooter rod from stern today (not my topper yet). Do you know if it is normal for the three screw bosses not to be threaded? I would expect these to be threaded from the factory but it is possible that the design relies on the screws to form the threads?
05A88FD1-E765-4BF2-80AA-8116D25879FB (resized).jpeg83C2CCA2-DDCF-4177-8918-513B637664EE (resized).jpegQuoted from BallyKISS1978:I am going with these art blades when/if I get it.
[quoted image][quoted image]
Those looks great! I wish they were not so expensive. Shipping to Texas is $35! I will probably still get a pair though.
Quoted from docquest:And to add to the list, your apron video display is shipping tomorrow.
Quoted from Mando:Nice is the topper back in stock ?
I placed an order with one of my distributors a few weeks ago for one. At the time it was on back order. If you want one, now would be the time to try and secure one as Stern has started shipping them again.
Rdoyle1978, that was my thought as well. It kind of matches the art in the back of the machine that has lightning in it.
Quoted from mighteagle:Spoke to joe from pin graffix said he is hoping to do a Elvira run if people are interested in them?
I am
Very interested in an Elvira set!
I got my screen mods and my topper today. The screens installed without issue and look great but my $1100 topper base plate is bent! I could probably bend them back in place without much of an issue but I don’t think I should have to deal with this at the price point being charged.
I love how the instruction show styrofoam covers designed to prevent this kind of damage but none were installed.
Quoted from BroMan90:Favorite mod for EHOH so far! Looks fantastic and easy to install.
[quoted image]
I agree! I got my kit today and installed them. I was very impressed with everything.
Quoted from Lrrr:Installed tonight. Wow, such a good mod. Wife likes it so much she wants one for the right side too. Thanks Brian!
[quoted image]
I was planing on getting just one but I am glad I got both. Looks even better as a pair
I got a new pair of speakers today for my machine. I think they are the same ones stern uses in their LEs. Has anyone done this upgrade? Could you tell a difference when only updating the two speakers?
I need a pair of 5.25” mounts for them but speakerlightkits.com is out of them and $70 for them from pinballlife.com seems like a rip off for two metal plates. Any other sources for these kind of mounts?
If anybody has an EHOH backglass (not translite) that they are willing to sell, please PM me! I would like to buy one.
Quoted from 2manyhobbies:Just contact Doug @speakerlights.com. When I got my kit for JP he was out but had them in about a week, he has a metal shop that makes them for him. . Now if my Elvira game will just get here, I already have the speakers and will just need to order his kit with the color rings. Hopefully mid April I will get the call.
Bye the way those are the correct speakers.
I just got an email from Doug that they are now in stock and placed an order for a pair!
We installed ours as well. Looks great!
Quoted from BallyKISS1978:Now I hope it doesn’t ship with the latest code :p
The code is something you can update or change in 30 minutes. Don't worry about that.
I upgraded my speakers and am very happy with the look and the sound but I am getting vibrations in the glass even which relatively low volume. I did not have this problem with the stock speakers. Any suggestions?
3D6FE94D-4A30-4C77-9AF0-ED3B925418AC (resized).jpegDD1ACD60-E667-4140-8715-A76CCDB3521B (resized).jpegQuoted from unlockpinball:ebay.com link: Official Stern Elvira House Of Horrors Pinball Topper 502 7105 00
He ended up selling 9 of them for $1,400.00!! Luckily I purchased before the $400.00 price increase!! Looks like he sold out of them.
There was not a $400 price increase. He is just marking them up for a profit.
I don’t recall seeing this design last week when looking for dude blades. Does anyone have these? They seem to match the art above the back of the playfield well.
https://www.retrorefurbs.com/shop/elviras-house-of-horrors-pinball-sideblades/
I have a printer and am interested in this. Did you print the STL as is or did you have to modify or scale it to fit?
Quoted from Mageek:I had to split it to get just top texture and scale it (used MS 3D Builder) theres lots of different sizes in the zip file
Would you mind sharing the final STL file that you ended up using?
I ordered some PDI glass for my EHOH today. With all of the upgrades I am buying I sure wish I could have just bought an LE and had a real back glass in my head.
I got my Retro Refurbs side blades today and installed them without screwing them up! I am happy with how they look.
https://www.retrorefurbs.com/shop/elviras-house-of-horrors-pinball-sideblades/
776FD376-DED4-4C67-93E9-479E24D2E421 (resized).jpegCAC52AED-7FA4-40B7-82B7-6A9E24BFB940 (resized).jpegQuoted from Pinkitten:Those are pretty wicked! About how long did it take for them to ship?
Not that bad, about a month or so. The quality is great and they were easier to install than other ones I have purchased.
Quoted from DeeGor:I kind of like the look of the retrorefurb blades. Thinking about grabbing a set.
[quoted image]
[quoted image]
Those are the ones I just installed and I was very impressed with the quality.
Quoted from KlownHammer:This glass is astounding! Whered that one come from? Its unreal!
I bought two sheets from Joey at Pinballdecals. He was great to work with.
Quoted from MacGruber:I haven't played my EHOH yet cuz my left goblin pin was not pinched so I could see it was going to fall off. Supposedly a new assembly on the way but that was 9 days ago.
[quoted image]
I have had the same problem and got replacements from Stern for free. To be honest, the replacements were not much better. It would have been better if they swaged the end of the pins instead of flattening them. If somebody has a better solution I would be very interested. The pins on the gargoyles at the entrance of the hose sometimes stick out so far that they hit the ramp when it raises or lowers.
Quoted from Concretehardt:I am saving up to buy a premium next year when they run them again, would love to get some opinions for must have mods for this game?
This for sure!!
That is strange, I did not know that was an issue. I have played 100s of games and never seen an air call on this game.
Quoted from Jecco74:What premium 3D printer do you recommend?
I love my Ultimaker! They are expensive but just work. I also had a Prusa but sold it.
Quoted from Chalkey:That skull is about 100x more theme appropriate than creepo, even though creepo is in the game.
The clown is in the game. He starts “drive me crazy”!
Just noticed that you already mentioned this!!
Quoted from PinMonk:Yeah, for the kind of dough these are supposed to cost, it should have been a lot more custom. Actually putting back the mechanical wheel of fate on the left outlane would be cool, too.
Did Stern have a mechanical version in this game at one point? I have not seen or heard of this.
Quoted from RobertWinter:Funny story about that topper. She has it because of me!
Way back when her first slot machine came out, I was fortunate enough to be in contact with Cassandra. I was trying to get one of those toppers so I asked her if she could get one from IGT as I'd be interested in buying one. She said "You know, I never thought to ask." Well, she asked and IGT sent her two of them on these really nice wooden display bases.
I ended up buying one from her, which I still have, and she kept the other one which is now being auctioned.
BTW, buyer's premium is 25%. Another 3% if online. Sales tax on top of that if picked up or shipped in California. That's almost a whopping 38%!
Great story! Congrats.
I am upgrading now and plan to transfer my Godzilla IC hardware over to Elvira to try it out! I will let you know how it goes.
Quoted from Mando:What did you use as the QR code scanner? Or did you remove it from Zilla?
I temporarily stole it from Godzilla. Good news is I was able to keep both games registered in my account using the same hardware. Hopefully once I move it back, I don't have to make any changes in my IC account.
I know that several of you have DOCQUEST's cool apron screen mod in your EHOH and will not want to place the IC QR code reader in your apron. To address this issue on my machine, I designed a mount that allows for the reader to be placed in the coin door. I am going to sell this as a kit. If you are interested or want to buy one they will be available first come first served and start shipping in less than two week.
I don't want to hijack this thread so post any comments or questions in this thread:
https://pinside.com/pinball/forum/topic/stern-insider-connected-qr-code-reader-coin-door-mount#post-6621582
Quoted from Mad_Dog_Coin_Op:I feel your pain. Waiting for a game that keeps getting pushed to the back of the line sucks! I just wanted to point out that the LE owners are sitting pretty because of the release of this new 25K version. The original LE was around 10K and is now going north of 15K. I'm not upset as a LE owner - Heck, my game is worth 50% than I paid for it. To top things off, the LE is colored correctly (no purple blood or couch). Same can be said for the premium owners to a certain degree. The only buyers that got price screwed were the SE buyers. That isn't a big deal because it too has the correct color scheme (I prefer the look of the SE over the 40th Anniversary game). SE and 40th Anniversary game won't likely see that type of price increase.
That is not how things work! People used the same argument when CGC released the CCr SE+ For the same price as the LEs. This lowered the value if the LEs, not increases it. Any time supply increases, prices fall; Especially for collectibles.
Quoted from javagrind888:Voting for DocQuest's Apron Mod for TWIPY.
Did it come out in 2021?
I will make sure to update my TWIPY vote to include you as best mod! I absolutely love mine! For some reason I thought that it came out in 2020. My mistake. Also, I recently posted that I am selling a mounting kit that will allow you to relocate the Stern insider connected QR code reader to the coin door. I think this is a must if you want to have dual screens and IC enabled on your EHOH. You can find out more and order one from here:
https://pinside.com/pinball/forum/topic/stern-insider-connected-qr-code-reader-coin-door-mount
Is it possible to get anything besides Santa with the key in December? I have gotten it 4 times in a row. Is it just luck? I have gotten Gila monster in the past but can’t seem to get it now with my insider connected.
Quoted from explosiveegg:Just a friendly reminder to everyone. If you complete Santa Claus Conquers The Martians today, there is an extended completetion video clip that plays.
I wish I could be we are traveling today. Better luck next year!
Quoted from Ajoelson579:Anyone have issues with their stairs getting caught on a gargoyle? If so how’d you resolve? Thanks!
[quoted image]
I have the same problem but it is the gargoyle pin that over extends and then catches on the ramp. The swage on the end of the pins is not big enough to fully lock them in place.
I find it so annoying that headlines bend the truth! Just say she gained 49k followers after recent news. I am going to go follow her now!
If anyone has an Elvira HOH backglass (not translight) that you are willing to sell, please message me!
Quoted from jake35:I don't think these were available to anyone for purchase, only came with LEs. Did stern actually sell these?
No, they do not sell them (I tried). This is why I posted here. It is possible that somebody has one they are not using in their game and if so I would be happy to purchase it.
For those new Elvira HOH owners that plan on adding DocQuest's video apron mod and want to maintain access to their insider connected QR code reader, I make and sell a mounting kit that allows you to move the reader to the coin door. They can be purchased on Pinside via this link.
https://pinside.com/pinball/market/shops/1295-gotfrogs/05778-metal-stern-insider-connected-qr-code-reader-coin-door-mount
Other offer a simmiliar mod now but I was the first person to design one and offer them for sale. I have sold over 500 of them and would appreciate you buying one directly from me. I have both in my machine and highly recommend them!
IMG_6632 (resized).jpgQuoted from Micahdell:Hello all. We just got our Elvira last week and over the weekend I put a few plays on it, it's a great game so far. However we are having an issue where the ramp that goes into the house is getting hung up and the left side Gargoyle. There is a pin the hold on the metal L bracket the pops up the Gargoyle that ends up sliding in towards the ramp and when the ramp goes either up or down it gets hung up on that pin and won't go either all the way up or won't come down depending on where the ramp is when that pin slides to far over. Has anyone else experienced this issue? Anyone found a reliable fix for this issue?
[quoted image]
This drives me crazy! I have the same problem. Stern sent me new mechs and they have the same problem. The pins are just not flared enough on the ends to keep them in place. I have had the pins completely fall out from one side.
C11FAC13-F780-40A2-8FEA-D1114F92BF34 (resized).jpegQuoted from SacPinDaddy:Just got my Elvira today. I need some help. I can’t get the playfield to go back in place. I can’t push it back any farther. Any help will be appreciated.
[quoted image]
It looks like the hooks bay have gotten bent during shipping. Can you post a picture from the side showing the front edge of the playfield? We had this happen on a Hobbit and had to replace the front hooks.
Quoted from gumnut01:I had a few problems. Once sorted haven’t needed to work on again. It’s a slow burn this one. I really enjoy playing it. One thing I did find with ball launch was I believe the gate at the top, the bracket was over the orbit and was hitting it on ball launch. Removed the wire inside and turned it all around, now it never hits the one way gate bracket. Also lifting up the metal ramp slightly so it clears the orbit guide rail is common to a lot of stern games. Had to do it in avengers and turtles. Here’s a pic of my gate bracket, you will see it’s opposite to yours. Btw you have adjusted the shooter and auto launch prongs if the ball isn’t sitting correct at rest right?
[quoted image]
Also I have fucking buyers remorse with pretty much every pin I bought.
You guys are crazy. I have never even come close to having buyers remorse with a pin.
Quoted from docquest:Finally got caught up on preorders for Elvira House of Horrors apron video screen mod. Now have a few in available on my pinside shop.
https://pinside.com/pinball/market/shops/1120-docquest-pinball-mods/04964-elvira-house-of-horrors-apron-video-display-mod
I highly recommend pairing this with my insider connected coin door mount!
https://pinside.com/pinball/market/shops/1295-gotfrogs/05778-metal-stern-insider-connected-qr-code-reader-coin-door-mount
Quoted from docquest:Here are some prototypes of what I'm thinking for revised art on my Elvira apron video screen mod. This mod plays movie trailers from all 26 movies that were featured in the season of Elvia's Movie Macbre that were licensed for this game.
This Blood Red Kiss version of my mod will be using glittery red in the eyeball and film strip frame to blend with the games new art style. As with my previous versions, the eyeball will illuminate with the games lightning effects via the under apron LED.
[quoted image][quoted image][quoted image]
Since the existing "Blood Red Kiss Edition" text did not fit well with my mod layout, I decided to add that text via a magnet which will also cover the ugly epilepsy warning in the center of the apron. The magnet will also be printed with red sparkly glitter and be included with the mod.
[quoted image]
I will also be including the same green eyeball start button graphic as well as an additional red glitter sparkle version. If you want to use the red eyeball start button I'd recommend replacing the green start button lens cover with a clear one. Not sure why Stern kept the green lens fir this version of the game, clear will look much nicer
[quoted image]
I will also be making a Blood Red Kiss version of my secret back door sign mod. This version will be flourescent pink/red to match the new game style. It will give a pinkish red neon glow to the outer edges of the current back door sign when it flashes on and off.
If you are interested in getting the Blood Red Kiss version of my video mod or back door sign mod please message me so I can get an idea of how many parts to order.
[quoted image]
Absolutely great mod! if you want two screens, I recommend relocating your QR code reader to the coin door with one of my kits.
IMG_9196 (resized).jpegYou're currently viewing posts by Pinsider gotfrogs.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/elvira-s-house-of-horrors-the-owner-s-club?tu=gotfrogs and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.