Quoted from Reality_Studio:

Sent a support email to Stern but in the meantime started to probe the issue myself. Pic one shows the issue, ramp goes up, gets caught up on the right gargoyle, ramp won't come down, glass must come off. The ramp looks to be too much to the right so I looked around but didn't see any obvious way to adjust it from under the table (pic 2). Maybe the house has to be taken apart but if that's the case I'll let me distributor dude handle it. One solution I'm trying is in pic 3. I lift the right gargoyle to access the screw. That screw seems to hold down the large metal bracket that the ball hits, and it seems like it slowly over time rotates left to where it eventually blocks the ramp. So what I've tried for now is rotating that metal bracket as far away from the ramp as possible, hold it there, then tighten the screw as much as I can. I'll have to play some games and see if that solution holds but I suspect over time the ball bashing it will just rotate it right back to where it blocks the ramp.
If anyone else has this issue and has a solution please let me know! If I hear back from Stern with a solution I'll let people here know.[quoted image][quoted image][quoted image]

Quoted from Pinstein:

Premium owners please chime in when you game gets delivered!

Quoted from musketd:

How does the cabinet look on it?

Quoted from Magicchiz:

Having issues with gargoyles in front of house. Originally they would pop up and stick in the up position. So I loosened them and repositioned. So now they move freely. Although after a few games the bracket gets hammered and moves. Thus making them catch again. Any ideas?
Magicchiz

Quoted from iceman44:

Gappa Angry
Pin Becoming a favorite all time of mine along with JP and TWD

Quoted from jfh:

Technically there wasn’t one but they generally sold for about $15k (USD)

Quoted from jandrea95:

Many were having this issue, myself included. Its a super easy fix fortunately!
Around 3:10 of this video he very well explains the fix. I believe ive seen him in this thread, he has some super helpful videos for noobs (like myself) and veterans alike.

Quoted from HurryUpPinball:

So tonight I went to play a few games of Elvira before watching some TV and low and behold my machine would not boot (It is less than 1 month old). My stadium lights were getting power and the board had several red LEDs but nothing else. After ruling out the power issue I did some research and it appeared to be a corrupted SD card. So I spent the better part of an hour downloading software and flashing it to a new SD card. Also took a detour into issues related to only half of the memory showing up on the newly formatted SD card and sorted that out. Flashed the software to the new SD card and everything is up and running again. Turns out is was just a SD card that went bad. I am going to put together a video tutorial on how to do this and will upload it here once available just in case anyone comes across the same issue.
[quoted image][quoted image]

Quoted from littlecammi:

With $1300 in mods purchased so far I have over $10K in my EHoH LE:
296.61 Omega plus lighting from PinStadium

Quoted from gumnut01:

Thanks for posting. The only solution I can see is a quicker lift. If it’s a 12-24v motor maybe they can increase the power to raise it quicker. If it was a arduino then it could be fixed through coding. This should have been a solenoid lift and release.
Shame. I’m out. I will check back in the future to see if there is a fix. Hopefully there is.
Thanks for all your help.

Quoted from gonzo73:

Ok, you guys have had your Elvira's a few months, how are they holding up , build quality wise?
Stern pins always feel like rickety balsa to me.
I played Elvira at Banning in January at INDISC, and loved the 2 games I played.
This is the first stern, I've even contemplated buying.
But Stern's business practices disgust me.
Is it as great as it looks?
I love Nordman games.
Convince me I should give the Evil empire my money.
Message from the wavering Freeeek Kingdom.

Quoted from Krupps4:

Looks like an amazing update, but I don’t get all the gushing with the need to thank Mr. Sheats. It just seems like such a fanboy thing to do. I mean, shouldn’t he be thanking us for (1) purchasing an $8000 - $15000 pinball machine that was incomplete at the time of purchase and (2) waiting patiently for a year in order for it to become close to complete? Again, I love Lyman’s coding but he is just doing his job and fulfilling his commitment to complete a pin that we all purchased a long time ago. No need to act like he’s doing us a favor.

Quoted from Krupps4:

I’m excited!!

Quoted from Krupps4:

Easy...

Quoted from jtgribble:

No worries if you missed it. I forgot yesterday too. Changed the date to Christmas day, played the hidden room and got the special clip and changed the date back. I'm really surprised there's no Easter egg on Halloween.

Quoted from jfh:

Do you make the back door shot often?