Quoted from Sebastian88:I don’t think I explain myself clearly there’s a piece of metal at the end of the ramp on Elvira and when the ramp goes down or up slowly there’s a chance that the ball can hit it and bend it. It’s not a matter of a plastic protector. there has to be something that you can put on the end of the ramp so you don’t bend the crap out of the thin piece of metal at the end of it If you should happen to hit it before it’s fully down
I understand what you are talking about and have the same concern, I wonder if one could use the same PETG material as the playfield protectors and cut the shape of the small, metal lead in ramp, only about a 1/4 longer so it has a bit of an edge that sticks out underneath. You could double sided tape it to the underside of the metal lead in ramp we are trying to protect. I think its thin enough where it would not cause the ball to hop (too bad) and if a ball hits it during up or down path, it would likely just flex but if it did get damaged, easy / cheap to replace.
I'll be installing my playfield protector this weekend and do have some extra material on hand, I may try to mock something up to test it's durability.