Is the new code using the turning roof top ? I only see it moving in attrack mode... or I'm so bad that I didn't see it yet 
(Topic ID: 252126)
Linked Games
Elvira's House of Horrors (40th anniversary edition)
Stern, 2021-
Elvira's House of Horrors (Blood Red Kiss Edition)
Stern, 2023
-
Elvira's House of Horrors (Limited Edition)
Stern, 2019
-
Elvira's House of Horrors (Premium Edition)
Stern, 2019
-
Elvira's House of Horrors (Signature Edition)
Stern, 2019
Topic Gallery
You're currently viewing posts by Pinsider KLR2014.
Click here to go back to viewing the entire thread.
1 week later
2 times now I had the problem of shooting the house and the ball gets “stuck” in the house, if i look inside i see the ball at the end of the ramp stuck. No matter how much i shake it won’t come loose. i have to remove the glass, tilt the playfield to get it loose again...
Anyone know this issue ? And whats the fix ?
Quoted from T7:There is a piece of spring steel on a one-way gate which makes causes this - you need to bend that spring steel so the it doesn't hold the gate closed when it's only the weight of the ball pushing the gate open (no momentum).
Thanks, i assume i need to remove the house for this ?
3 months later
Quoted from bloodydrake:So I dug into figuring out why my vux dribbled out or was forced to clear every other time.
Looking down the hole while watching the clearing 3 or 4 strikes, It looked to me that it was only slightly off center. Underneath side of playfield there were no drilled holes btw(Nov 2019 was manufacture date of this premium model)
With the discussions around the shape of the tip and flattening or making it convex, I suspected like a pool cue i could adjust the angle of the plunger of the vuk abit to change the english so its not hitting off center which seemed to push ball back towards the subway and the ball ends up rubbing against the wall above as it launches.
I was considering two approaches not requiring drilling.
1. You could sandwich washers under the approprate screws to change the angle of the rod slightly.
2. just bend the L bracket L angel slightly open or closed to offset angle.
Looking at mine it looked that it was just slightly offset to the south..so I just bend the l bracket and now when i test it , about 80% hit the targets,some hit the trunk secret entrance and occassionaly straight down the left outlane(I'm gonna try adjusting power to see if I can't shape hits better)
So this might be as good starting tweak to try before trying to reposition if your vux is just slightly off center.
[quoted image][quoted image]
Brilliant! Bend the bracket as you described and it’s working flawless now. 1 minute of work. I strongly suggest to try this first before you try anything different to fix the problem. Thanks for sharing bloodydrake
1 month later
The eyes are a mod I bought, you can find them here:
https://www.2niro-pinball.com/boutique/Pinball-mods-c27074105
1 year later
Re-joined the club again with a NIB premium may 2021 run. Had to adjust the crypt but that is working fine now but I still have an issue with the vuk of the house, everytime the ramp goes up and shoots the ball it goes stdm 100% of the time. Played with the pitch but that didn’t solve it.
Any ideas ?
Promoted items from Pinside Marketplace and Pinside Shops!
Vandalia, OH
You're currently viewing posts by Pinsider KLR2014.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
