Just picked this machine up and it was working great. Went to turn it on later today and there was no power. Pulled out the fuse in the junction box at the bottom/front of the cabinet since the rest looked fine, and it blew.

It's labeled 8a 32v, so I just want to make sure the 8a versions of these are correct if anyone knows: https://www.pinballlife.com/1-14-slow-blow-fuses.html

Thanks for all of the replies. The left GI was out so I replaced the bulbs, then the fuse blew. Turns out there were two wires in a socket touching each other.

I sacrificed a fuse from another machine while I wait for the order to come in and all is working well now.

Appreciate the advice. I don’t mess with that and is why I wanted to double check here. I have a ton of fuses, up to 5a handy and always reference the charts when replacing. I just couldn’t find much online that wasn’t board related.

I’ll make you a craigslist deal, you know, $5,000