You're currently viewing posts by Pinsider pickle.
Click here to go back to viewing the entire thread.
Quoted from CoolCatPinball:I chose cool white GI, color matched inserts. In the backbox I used warm white GI, with cool white flashers.
[quoted image]
Nice example of good lighting!
OK…thought I would check in this thread first before I purchase but I found a CPR silk screened playfield…..how off are the dimples and any big issues found on these swaps with the CPR playfields? Just want to be prepared once I get started on the swap.
Time to give my game some love…..art is worn off the ELVIRA inserts and a couple others…could put insert decals on but can be tough to line them up perfect and eventually they will probably wear anyway.
Quoted from CoolCatPinball:The dimples on mine were off pretty bad. Some almost 1/4". Major playfield holes were correct of course. But, I'd highly recommend test fitting each and every mechanism as you go. Mark the correct screw locations with a sharpie, then drill. It's a pain in the ass, but necessary. At least that was my playfield.
Beautiful playfield, but wrong type of dimples I believe he was asking about the accuracy of the dimples on the back of the playfield which indicate where screws should go.
You sir are correct! I will verify fit and adjust as necessary…pain in the ass for sure…I figured they might be off. Can’t wait to get this done. Will be worth it for sure!
Quoted from Enchantress:I think Cassandra and her party monsters would approve! Thnx brmorr
[quoted image][quoted image][quoted image]
Whoa…where can I get one? I need this but on the 30oz Yeti… please send me the contact for the hook up on one.
You're currently viewing posts by Pinsider pickle.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/elvira-and-the-party-monsters-club-monsterous?tu=pickle and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.