Hi, new member here, I just got Elvira on Wed. but it is a little rougher than I had hoped. A couple of questions, l have the Monster slide plastic but it is not attached. I should be able to make some brackets but I can't find the light that attaches to it. I would think it should be somewhere dangling but I can't find it. Second question, the ELVIRA inserts all light up when they do their fast blinking but when they do the slow blinking the "A" doesn't light, any ideas why this is happening? Thanks for any help you can give.

Are there supposed to be 3 lights as part of the skull, one for each eye and one mounted between the eyes? I'm looking at the operator's manual and it only shows 2 lights and one light over the ramp.

Crap, I just seen this, it looks like I mounted the flasher above the ramp. Now I'm back to square one, looking for the missing light.

Does anyone have any tips on getting the monster slide installed? I've probably spent about two hours trying to get that one screw in.

Took a dinner break and watched a little of the Hallmark channel. Decided to go back down to give it another shot and 10 minutes later, I did it. Elvira never looked better.

Always a happy ending.

Now that I have my new ramps installed and they look great, would anyone be in the market for my used ones?

Looks like you are missing the plastic for the monster slide ramp and the light that attaches to it. I was missing that as well. I had to go hunting for the missing wire, it was in the harness but never made it up to the playfield. I had to do some rewiring as well as fabricate a bracket to hold the light socket to the ramp plastic.

If I bought the machine looking like that, I could live with it but doing what you are doing, no way.

It's part of the skulls wiring, they are all part of one connector.

That is the way to go.

Got mine from Little Shop of Games. I also added a MRS under the left ramp