You're currently viewing posts by Pinsider da_topper.
Click here to go back to viewing the entire thread.
Quoted from Medisinyl:The mod is designed to the fraction of a millimeter for most parts, so it's likely that extra height would cause a problem in function and/or appearance. Gargoyle would sit higher (possibly a concern for the exiting ball), not fit properly on that post, and perhaps cause issues when mating against the casket and grass (or even an issue with the new lower wall height).
So I wouldn't recommend it, but if someone has already installed the mods with such a protector, perhaps they can chime in.
Can the Gargoyle’s bottom be filed down? Not sure what your mod is made of.
Quoted from Rdoyle1978:you have 2 plastic protectors installed?
Just two, the factory plastic with art and the fluorescent green plastic from Freddy’s in Germany.
Quoted from Medisinyl:It's 3D printed with PLA. Several smoothing stages help reduce the majority of the 3D printed appearance, so these mods look nicer than a typical 3D printed part.
And while it would be possible to belt sand (or otherwise) material away, it would break through the outer wall, into the inner structure (not that it would be seen from the top if done well), and ultimately make the base of the wall look off I'd imagine.
As much as I'd like to offer a version that could fit here, adding another variable to the production on these would be more inefficient than desired.
I wasn’t seeing if you could do a special run. Maybe I’ll have a friend order one and then see if it could fit on mine. Or just order the set and if the gargoyle piece doesn’t fit then I won’t use it. Thanks for your help.
You're currently viewing posts by Pinsider da_topper.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/elvira-3-interactive-casket-gargoyle-vuk-cover-medisinyl-mods?tu=da_topper and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.