Elvira's House of Horrors (Limited Edition)
Stern, 2019
Elvira's House of Horrors (Premium Edition)
Stern, 2019Quoted from tk375:Mech Gargoyle/Casket set - $145.
Am I on Run 16 or 17? Thanks!!
You'll make #16 for sure (you were only a few off from #15).
New interest is filling run #17 currently (I accept PMs for Elvira interest, but anyone that posts here gets noted down as well).
Quoted from Medisinyl:You'll make #16 for sure (you were only a few off from #15).
New interest is filling run #17 currently (I accept PMs for Elvira interest, but anyone that posts here gets noted down as well).
Thank you Sir!
Medisinyl would you happen to have the dimensions of the flaps inside the mausoleum that cause doors to lift when ball goes thru? was gonna print some stickers at work(shhh don't tell anyone
) but forgot to open cabinet and measure
Quoted from bloodydrake:medisinyl would you happen to have the dimensions of the flaps inside the mausoleum that cause doors to lift when ball goes thru? was gonna print some stickers at work(shhh don't tell anyone ) but forgot to open cabinet and measure
About 22mm x 28mm
Quoted from bloodydrake:medisinyl would you happen to have the dimensions of the flaps inside the mausoleum that cause doors to lift when ball goes thru? was gonna print some stickers at work(shhh don't tell anyone ) but forgot to open cabinet and measure
I did some 3D skeleton prints for the flaps, now that I’m thinking I should do zombies instead lol
thanks! @medisinyl, and ya it was MrCleanHead skeleton stickers that inspired me
Quoted from bloodydrake:I think it turned out well. Silly but I love the light hearted cheesy humor of this table
Ha! I love it Thank you for the video of it in action.
I'm sure you've really got to be looking for it at full speed, but nice to have that easter "egghead" in there 
Knowing the pic I can see it pretty good at full speed..but ya, I expect "what was that?" .."is there a person in there?"
.
Quoted from Medisinyl:Just to give a quick update here:
I'm shipping the last of the first TMNT batch out tomorrow, then have a RZ set to finish. Will get back on run #15 soon after.
I have a buddy that wants the same thing I want. can you add another set to my order? Thanks!
Quoted from tk375:I have a buddy that wants the same thing I want. can you add another set to my order? Thanks!
PM sent.
Run #15 will ship sometime during this coming week.
You did an amazing job one of my favorite mods of all time... now lets stop celebrating the awesome job you did and get onto another one!!! HINT HINT!
I think there is tons more opportunities here. How about gargoyle 3D bat flippers, something to cover this trunk, or gate entrance to the ramps.
Let me know about your next mod!
Looking like Monday will be ship day on the current run. Should have a pic up late tomorrow.
Quoted from drfrightner:You did an amazing job one of my favorite mods of all time... now lets stop celebrating the awesome job you did and get onto another one!!! HINT HINT!
I think there is tons more opportunities here. How about gargoyle 3D bat flippers, something to cover this trunk, or gate entrance to the ramps.
Let me know about your next mod!
Thank you for the positive feedback! Not sure if I'll ever top the response the Elvira set has had, so I'm hoping they at least get in the running for a TWIPY this year--would be awesome
Otherwise, lots of mod ideas are in the pipeline, and there's a chance Elvira could see another mod or two at some point (ramp entrances are a possibility, and while flipper mods haven't been my thing, it's something I could consider, but I do think the Scared Stiff flipper bats are a good option here). Have to get through more of my backlogs before taking on another wave though (TMNT list is huge).
Quoted from Medisinyl:Looking like Monday will be ship day on the current run. Should have a pic up late tomorrow.
Looking forward to the pictures. I am in RUN #15!
Dex
Quoted from whiteyjfm:Glad to hear run #15 is shipping. I am on run #17. It will be a looooongggggg wait.
Hopefully not too far off, but as older positions on waitlists have been piling up, Elvira is now getting blended into the mix rather than being the priority it had been.
Have also been sick the last couple weeks unfortunately, which hasn't helped progress lately (not covid [was tested last week]).
Gargoyles and lids are completed. Gonk houses and caskets just need grass paint before clear/assembly.
Also made progress on the RZ, BSD, and TMNT orders that are combined in this run.
Orders with TMNT mods will ship out later this week once the batch is finished (over 20 sets in the works).
Anything else will ship out tomorrow as I won't make the 6pm cut off today.
20201019_163356 (resized).jpg20201019_163419 (resized).jpgTracking will be sent out within the hour on all domestic orders without RZ or TMNT mods.
International orders are boxed up and ready, but whatever system is involved with international orders for USPS was down today, so they'll go out tomorrow.
Quoted from Hayfarmer:Nice!!! Hope you start run #16 soon
Will send out messages for run #16 this weekend. Have most of the non-custom parts printed for run #16, but not cleaned and prepped for paint yet.
Quoted from Medisinyl:Tracking will be sent out within the hour on all domestic orders without RZ or TMNT mods.
International orders are boxed up and ready, but whatever system is involved with international orders for USPS was down today, so they'll go out tomorrow.
Hi there, I've just joined Pinside but seem unable to message the seller.
I'd be very interested in purchasing these mods please.
Thanks
Kris
Quoted from KrisGonzo:Hi there, I've just joined Pinside but seem unable to message the seller.
I'd be very interested in purchasing these mods please.
Thanks
Kris
I appreciate your interest, and I'll add you to the list.
Not sure why you can't message, but I'll message you when I get to your run.
It may be run #18 that is currently filling (unless some ahead drop out). Starting on run #16 soon, and will update here as I get through the runs.
Quoted from Medisinyl:I appreciate your interest, and I'll add you to the list.
Not sure why you can't message, but I'll message you when I get to your run.
It may be run #18 that is currently filling (unless some ahead drop out). Starting on run #16 soon, and will update here as I get through the runs.
Thanks very much for the reply. I'm happy to take all of the parts to fully pimp the machine.
I think perhaps I may have to wait 48 hours to message as part of the sign-up.
Excellent mods though. I've looked on a few websites and yours are the best I've seen.
HANDS DOWN the best mods ever! Truly special. This is an awesome game - Greg and his mods have taken it over the top!
Received today and installed in minutes
Quoted from Medisinyl:Still painting these at the moment, but for now, here's a teaser of one I chose to do custom lids for:
[quoted image]
Hey that's mine! Awesome work Greg. Just received today. Thanks again!
Run #16 is currently being compiled and I'll update this post as payments come in. New interest is currently filling for run #18, but may still make run #17 if enough back out that are ahead.
Run #16 thus far:
1) Jobowens
2) Hayfarmer
3, 4, 5) tk375 (3 sets - pending)
6) DakotaMike (pending)
7) brickbuilder14
8) muymanwell
9) TTARider (pending)
10) whoknowsgoi
1) Jobowens
2) Hayfarmer
3, 4, 5) tk375 (3 sets - pending)
6) DakotaMike (pending)
7) brickbuilder14
8) muymanwell
9) TTARider
10) whoknowsgoi
11) M1Cha3l (pending
1) Jobowens
2) Hayfarmer
3, 4, 5) tk375 (3 sets - pending)
6) DakotaMike (pending)
7) brickbuilder14
8) muymanwell
9) TTARider
10) whoknowsgoi
11) M1Cha3l
Can I get on the list for-
2-piece grass set for the front flashers - $39
Gonk's Dog House (with grass flasher piece) - $65
Mech Gargoyle/Casket set - $145.
Quoted from Nysbadmk8:Can I get on the list for-
2-piece grass set for the front flashers - $39
Gonk's Dog House (with grass flasher piece) - $65
Mech Gargoyle/Casket set - $145.
Noted. PM sent
-----------------
Should have run #16 finalized any day now (had several disappear without letting me know).
EDIT: Should now be final. 13 set run.
Run #16:
1) Jobowens
2) Hayfarmer
3, 4, 5) tk375
6) DakotaMike
7) brickbuilder14
8) muymanwell
9) TTARider
10) whoknowsgoi
11) M1Cha3l
12, 13) Myles32 (pending)
Final list:
1) Jobowens
2) Hayfarmer
3, 4, 5) tk375
6) DakotaMike
7) brickbuilder14
8) muymanwell
9) TTARider
10) whoknowsgoi
11) M1Cha3l
12, 13) Myles32
Quoted from Slapfighter:Finally, one of the hottest mod stuffs out there in pinball history arrived in good old Germany.
Thank you, Greg.......[quoted image][quoted image]
Awesome Thank you for the pics!
Quoted from Hayfarmer:Looks great! Mine are on batch being made now. Can't wait
Should be shipped at the end of this week
Quoted from Slapfighter:Finally, one of the hottest mod stuffs out there in pinball history arrived in good old Germany.
Thank you, Greg.......[quoted image][quoted image]
Where’d you get the trees at? Those look awesome!!
Quoted from Yesh23:Where’d you get the trees at? Those look awesome!!
Got them from ebay.
Type following words:
" Tree model landscaping miniature "
Or in ebay Germany:
" Bäume Baum Modell Landschaft Miniatur Modellbau "
Painted them black, double sided tape, voila.
Quoted from Slapfighter:Got them from ebay.
Type following words:
" Tree model landscaping miniature "
Or in ebay Germany:
" Bäume Baum Modell Landschaft Miniatur Modellbau "
Painted them black, double sided tape, voila.
Man I looked and couldn’t find them. What you’ve done looks incredible!!!
Quoted from Yesh23:Man I looked and couldn’t find them. What you’ve done looks incredible!!!
I used these
Screenshot_20201118-180632_Google (resized).jpgWanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/elvira-3-interactive-casket-gargoyle-vuk-cover-medisinyl-mods/page/8?hl=krisgonzo and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Gainesville, FL
Hamilton, ON
Sandhurst
Nürnberg
