Yep, PM is still the way I'm taking orders for now. Once I finally ship the last run of the growing list, I'll add them to the shop (harder to explain a waitlist backlog to those seeing "in stock" in the shop).

And that's some awesome feedback on these. Thank you! Easier for me to just see those that are more skilled than I, and strive to improve where I can, but the positive response I've gotten on these has been truly appreciated.

Wednesday is looking like the more realistic ship date for run #5 (seems to be ending up a couple days after I estimate each time, so clearly I'm terrible at estimating ). Will be back on these 100% tonight, and will be upping run #6 capacity to 12 orders. Other mods (made runs of all my Alice mods, so there's a handful available again) and crazy market volatility have forced some of my attention this past week.

Run #6 will be:

1) Minwick
2) FarminSharman
3) cdonnerusmc
4) JimSheffield
5) Jetcom1121
6) benjn
7) Ethviking31
8 ) Challenger1128
9) javagrind888
10) PunishersLEMC
11) NimblePin
12) Fuseholder

EDIT: Currently filling run #10, and perhaps #11 soon if most come through with payments on the list, so there's still a fair wait at the tail end on these. Though as noted, I believe run #6 and onward should go a bit faster at this point as I near the end of other mod orders and now have some stock of ACNC mods again.

Still plugging away. Guaranteed to ship tomorrow.

Custom caskets from this run:

20200304_173634 (resized).jpg

Tracking numbers will be PM'd when I'm home later tonight.

Shipped run #5 on Thursday and was away over the weekend, but I do have progress on run #6 already (all parts built aside from custom casket tops that I'll likely make in CAD tonight, and the lower caskets have been cleaned and assembled). I'm planning to have them out by Saturday. Will aim for Friday, but as noted, my estimates haven't been great and there are several curing periods between the adhesive, pre-paint smoothing coats, paint, and final clear.

I do have several updates in my notes for your order

$249 + $7.99 shipping within the US. So $256.99 shipped total (+$10 for a custom casket lettering/date section).

Currently using three CR10 V2 Printers. Superior in every way to the CR10s I was using, which had several issues for me.

First CR10 V2 I got was from my fiancee for Christmas, and I bought two more.

Have only needed to set the level once on each after these months and still no issue. I can also use the entire bed without issue (CR10s I was using always had an issue with this and needing lots of fiddling if I switched what I was printing).

Run #6 ultimately ended up 14 orders total, so my largest run yet. Likely have to ship on Monday. 8 custom orders ended up taking nearly an entire day on their own, and proving to be a great hindrance for the cost (also means I can't plan ahead for those parts, and if anything goes wrong with a custom part, I have to wait for a free printer, plus a few hours to have a new part made--with a non-custom, I have extras on hand for any QC issues). Anyone that got a quote earlier on for a custom order is locked into that price, but for future orders, the custom casket price is now $20. The custom casket option will likely be discontinued once these hit the shop and I can no longer fill runs.

Sent out some PM reminders for run #7.

Currently run #7 is looking like:

1) Jackalwere
2) Pinb1
3) Cyrus
4) ckorth
5) Roon
6) Drew13
7) KLR2014
8-10+) Unpaid thus far. There's a chunk of paid orders down the list that I'll put in this run if I don't have a response from the others by Sunday.

I'll likely go beyond 10 orders on run #7 as well once I know where I'm at.

Ultimately adding orders to each run is already showing that I'll be one run ahead for most run # estimates (if I suggested you'd be in run #9, most should be in run #8 instead).

Should have some uploaded here tomorrow night

Ha Perhaps poor wording on my part. Some on the list disappear or want to be reminded when their run is soon to be built before paying (always an option). And I know some that have paid are checking to see if they make the run (just a reminder to check back after Sunday for the updated list).

Very close to yours. Was a slight chance you'd be in run #7, but looking less likely now as payments come in ahead. Definitely run #8 at the latest.

Love the Scared Stiff mods on your game (put the same flippers in my RZ). I had seen your game in the main thread and was already looking forward to seeing how you put it all together with these mods

Otherwise, still hoping to get custom photos up tonight, but likely in the a.m hours as I paint through the night (while it's not supposed to be an option, there is a custom dog house name in this run). Had another small setback earlier today with a custom casket I had to redesign and reprint (didn't notice the issue until finishing up the pre-paint work today). Shipped some other work out earlier and will be painting these soon (ton of hours go into painting, so I'll likely have to finish the second half over the weekend).

Still projecting faster than most runs for work days as I was away over the weekend and last moment hosted a birthday get together yesterday (had generally been working 7 days a week beforehand). Also the largest run yet at 14 sets. I expect I'll bump run #7 to at least 12.

Only have the first coat done on the purple stone thus far (did the gray stone first). To finish just the purple stone parts on this run, it will take 171 total passes of paintwork (I always make an extra casket lid just in case).

Posting a preview of the custom caskets in this run to show the text. They'll get looked over before the next paint stage for any inner text stringing that's revealed.

Will post pictures of the finished caskets before shipping. Text will pop more once the lighter detail colors are finished.
20200314_032034 (resized).jpg

Run #7:

1) Jackalwere
2) Pinb1
3) Cyrus
4) ckorth
5) Roon
6) Drew13
7) KLR2014
8 ) leeriley
9) NeilMcRae
10) bigehrl
11) nexfx
12) zwartepanter (had one ahead disappear, and a paid buyer that wants more time for his custom casket decision, so I got you in #7 )

Otherwise, I ended up leaving Saturday morning to look at a car down south (bought it) and visit my fiancee's family--didn't get back home until 1am. Started prepping my previous daily for sale yesterday, and tackling last minute corona-prep shopping.

I did paint until about 4am last night, so progress has been made, but tomorrow would be the earliest I can ship at this point.

Run #6 ships today. Complete aside from the three pop sets I'm finishing up now, and assembling the casket lids.

Fireflyman1 has also been added to run #7, so it will be a 13 order run.

Will send out tracking tomorrow.

The vast majority of these shipped out earlier today (before final pickup), so most are on the way.

Awesome! Thank you for the photos

Gonk's dog house? If so, then yes it's available. Should be more information and pricing in the first post. Zack at SDTM on YouTube also did a video on the Elvira mods that shows installation.

This may make your custom casket my favorite thus far. The Bony Beast spine adds perfect context here

Also gives me confidence that the mods will look great in tatman's game as well.

Post #122

Hopefully we'll see final pics once he gets his mods

Run #8 will be another 13 sets:

1) Kaiserstadt
2) fast1981
3) fattrain (2 sets)
4,5,6,7,8) Macca101010 and friends.
9) Pozzest01
10) jmatlack
11) Pinstein
12) Ftrmech

Will get some pics up soon of Run #7 .

Looks like you'll just make the cut-off for run #9 (one earlier than quoted I believe)

Sorry for the delay in run #7 updates. Was in the hospital for 18 hours until last night (I'm okay). Taking a mental health break today, but will be finishing the run up soon.