Huntington Beach, CA
AWSOME !!! can’t wait to install these on the game. It’s been a long wait but well worth it. Thanks for making such a killer mod.
(Topic ID: 259041)
Linked Games
Elvira's House of Horrors (Limited Edition)
Stern, 2019-
Elvira's House of Horrors (Premium Edition)
Stern, 2019
Topic Gallery
Quoted from Medisinyl:Planning to ship run #19 out on Tuesday 3/16.
Had a few people disappear in communication, but moving forward with what I have. May try to start my run #20 list with more time ahead to avoid the unnecessary gap (some runs are more of a challenge to get 12-14 people to respond in a timely fashion and finalize custom choices [caskets all get painted at one time, so I have to wait until everything is decided, customs made, etc.]).
Can’t wait! Well I can because still waiting for Stern to make my Elvira.
Juelich
Quoted from HopBeard:Are we still able to put our name in for a Gonk, and Mech Gargoyle/Casket set?
Yes, I'll add you to the list and send you a PM when I get to your run. May be run #23 or #24.
Shipping run #19 today.
I appreciate your interest.
Customs from run #19.
Unusual interest for the Scared Stiff casket this time around. As noted when I first made the casket, the web lids will remain a one-off, but for one of them, "in here" was removed for the webbing element.
Custom Gonk houses are a bit more colorful this time around (all colors I opted to do, so hopefully the recipients like them). EATPM letters are colored to match the words from Elvira and the Party Monsters. GIZMO colored to match the Mogwai, and THOR to be sky/clouds/lightning (similar to the Whirlwind color scheme).
Quoted from Medisinyl:Run #19 has shipped (will send tracking by tonight). Will ship orders that had ACNC/RZ mods over the next couple days.
Will start run #20 messages by this weekend.
Super excited! Thanks so much!
Quoted from Medisinyl:Run #19 has shipped (will send tracking by tonight). Will ship orders that had ACNC/RZ mods over the next couple days.
Will start run #20 messages by this weekend.
Awesome!! Thanks for the update and all your hard work.
I received my mods yesterday and installed them this morning. Greg you have knocked these out of the park. The detail on these are incredible. These were super easy to install and make the look and gameplay of the machine even better. Thanks again for the super fast shipping and keep all these Awsome mods coming our way. Thanks again. For all those pinheads who have these coming your way you all will be extremely happy with these.
Quoted from Oilrat:I received my mods yesterday and installed them this morning. Greg you have knocked these out of the park. The detail on these are incredible. These were super easy to install and make the look and gameplay of the machine even better. Thanks again for the super fast shipping and keep all these Awsome mods coming our way. Thanks again. For all those pinheads who have these coming your way you all will be extremely happy with these.
Thank you for the stellar review! I'm happy to know the mods have met expectations and are enhancing your gameplay experience 
It can be a bit of a grind to make so many of the same mods (would like to be able to offer more new development for other games), but I'm very appreciative of the continued demand, and the positive feedback from each run keeps me knowing I'm doing some good for the community here.
-------------------------
I should have run #20 messages sent out by tomorrow night.
This weekend is dedicated to AMH progress (about 25-30% complete). The success of the Elvira mods is allowing me to risk more time and expense in developing for this set, and I hope others agree with the vision once complete. Aiming for a late April reveal if possible.
Quoted from Cosplay:Hi can I still get in on getting these mods
Yes. New interest is likely filling for run #24, and I'll add you to the list and message back when I'm about to build your run.
Generally PMs are the way to get on the Elvira list.
Thank you.
Love the mods!! Now just need Stern to ship the pin. Thanks so so much!! Have the topper and side armor arrives in Thursday.
64D920E4-0A64-4C48-BA2D-E0EC73D68D7C (resized).jpeg7A85A8F1-0A6F-4FF1-808A-66BE423FA398 (resized).jpeg91D12157-A875-4A37-BB5F-CE19F892EDB7 (resized).jpegD1E10202-2408-4797-9825-71A5F19A0877 (resized).jpegMessages have been sent out for run #20. I'll update here as spots are confirmed/paid.
Run #20
1) RobertWinter
2) JM149
3) Jecco74
4) Wzpin
5) wtatumjr
6) bigdaddy07
7) EaglePin
8 ) Wes62
9)
10)
11)
12)
13)
9) RPZ
Added over 3 years ago:10) Tris
Pending (LaButcher, Jordan2432, Nato01).
Added over 3 years ago:Pending also (Drew13 and Derfone).
Quoted from wtatumjr:PM sent
Quoted from Wzpin:I sent a PM as well
Will get back to everyone soon. Living on vampire hours and just now waking up 
Been working on AMH every day/night until I collapse since Friday night (first game I'm using a motor on, and first to get real wood filament that gets stained). Not sure if anyone with an AMH knows they're in the works, but I tend to hide such teasers in my existing threads before an actual reveal. Will have 100s of hours into the full set once complete.
Got the parts today. Wow they looks really well done. Fits so good to the game. Thanks for the great job
But I have a problem with the Vuk after installing. It’s not hitting the targets anymore. The ball is distracted to the right (outlane). When I remount the mod it hits the targets again. I made a slow motion video and it seems that it hit the left tooth and that’s the reason why it’s distracted.
There’s not much adjustment to made. Any idea how to solve this problem ?
Thanks in advance
Quoted from sirlonzelot:Got the parts today. Wow they looks really well done. Fits so good to the game. Thanks for the great job
But I have a problem with the Vuk after installing. It’s not hitting the targets anymore. The ball is distracted to the right (outlane). When I remount the mod it hits the targets again. I made a slow motion video and it seems that it hit the left tooth and that’s the reason why it’s distracted.
There’s not much adjustment to made. Any idea how to solve this problem ?
Thanks in advance
Out of about 250 gargoyle mods shipped now, only a few have reported an issue with the VUK trajectory. The ball shouldn't touch the mod at all. I'm not quite sure what is making this difference for a few and not the majority.
Do you happen to have plastic protectors on your game that would raise the gargoyle higher than what I designed around?
Otherwise, heat makes the PLA moldable if necessary (if only a small adjustment is necessary) and could be touched up afterward if any paint is harmed.
Quoted from Medisinyl:Out of about 250 gargoyle mods shipped now, only a few have reported an issue with the VUK trajectory. The ball shouldn't touch the mod at all.
Do you happen to have plastic protectors on your game that would raise the gargoyle higher than what I designed around?
sorry no. I try without the rubber (post) and try several vuk coil settings but all the same 
if you like I can Upload the slowmotion video
FBE599DE-BE09-4762-8106-995EF16840F2 (resized).jpeg
Quoted from sirlonzelot:sorry no. I try without the rubber (post) and try several vuk coil settings but all the same if you like I can Upload the slowmotion video
[quoted image]
Looks to be taken from a similar (less favorable to see the top of the VUK) angle as my first post photo, and if so, appears as though the top of your VUK may be lower than the machine I designed with. Could be an illusion, but it would make sense as to why yours is having an issue if so. If it's obscured in my photo, it shouldn't be nearly fully visible in yours.
Quoted from sirlonzelot:Great point. I bend it up and now it works. I make before and after picture. Hope that helps anyone with the same problem
Thank you ![quoted image][quoted image]
Excellent news and great photos. Thank you!
That's a drastic difference in the angle at the top of the VUK.
I'm wondering, for people whose VUK works perfectly, what is your measurement from the top of the post to the top of the VUK?
Close to finalizing my run #20 list, and final reminders have been sent out.
Run #20
1) RobertWinter
2) JM149
3) Jecco74
4) Wzpin
5) wtatumjr
6) bigdaddy07
7) EaglePin
8 ) Wes62
9) RPZ
10) Tris
11) Drew13
12) LaButcher (pending)
13) Jordan2432
14) Nato01 (pending)
15) Derfone
Vienna
Quoted from idefixx:Hello, is it able to send it to Austria it would be really very nice..
Thanks a lot.
idefixx
Yes, I ship international and will add you to the list. I appreciate your interest.
New interest is tentatively filling for run #24.
Quoted from Medisinyl:Close to finalizing my run #20 list, and final reminders have been sent out.
Run #20
1) RobertWinter
2) JM149
3) Jecco74
4) Wzpin
5) wtatumjr
6) bigdaddy07
7) EaglePin
8 ) Wes62
9) RPZ
10) Tris
11) Drew13
12) LaButcher (pending)
13) Jordan2432
14) Nato01 (pending)
15) Derfone
Going to move forward with run #20 later today (anyone still pending can get into #21 if still interested).
. Just a one time thing. Got around to installing my mods today. Everything fits and looks great. Almost like he’s done this before...
I asked for Thor (my dog’s name) on Gonk’s house. I really appreciate the creative license used here - the blue with the lightning bolts was really clever and i wasn’t expecting that.
3F91FE95-5414-4B91-BAD7-67DA7640BDD6 (resized).jpegFA9BB6F6-8DA8-41A7-9E94-15632511D9ED (resized).jpegQuoted from Completist:Got around to installing my mods today. Everything fits and looks great. Almost like he’s done this before...
I asked for Thor (my dog’s name) on Gonk’s house. I really appreciate the creative license used here - the blue with the lightning bolts was really clever and i wasn’t expecting that. [quoted image][quoted image]
Thank you for the photos
I like how the coloring of the THOR letters compliments the ramp and playfield (wasn't even thinking of that )
1 week later
Good progress has been made on run #21 during the outage (still need to know customs and such to get further). I'll send out messages by Tuesday night (hopefully tomorrow) and get everything finished as soon as possible.
As previously announced, run #21 will be the last run to offer unique custom caskets (previous custom caskets can be chosen as an upgrade while I'm still making these runs--beyond that, options will become more limited).
Quoted from Medisinyl:An imposter in this run . Just a one time thing.
Hopefully the recipient will offer a photo once installed.
Here it is.
EHOH coffin (resized).jpgQuoted from RobertWinter:Here it is.[quoted image]
Thank you for the photo!
Neat to see something different after making so many purple ones.
Sydney
Run #21 messages will go out later today/tonight. EDIT: Messages have been sent, and I'll continue down the list if any back out.
Quoted from RPZ:[quoted image][quoted image][quoted image]
Super worth the wait. Few minutes install! Thanks mate!
Awesome Enjoy the mods!
Confirmed for run #21 thus far (I'll add to this post as orders are paid):
1) smarti
2) keys88
3) GranpaDave
4) fargen
5) Izzy24
6) mighteagle
7) Drac
8) n2vsw
9)
10)
11)
12)
9) Sixxin
Added over 3 years ago:10) jcssupplies
Added over 3 years ago:11) N. Du (FB)
Vancouver, BC
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
