What wood, and measurements are you using for the parts the playfield rests on when its in the upright service position (I'm assuming those are the "cleats"? Sorry for being lazy if covered in earlier posts - just a post # would be fine.
You're currently viewing posts by Pinsider dgarrett.
Click here to go back to viewing the entire thread.
What wood, and measurements are you using for the parts the playfield rests on when its in the upright service position (I'm assuming those are the "cleats"? Sorry for being lazy if covered in earlier posts - just a post # would be fine.
Quoted from Lovef2k:I only had to replace 1 pf rest, the one in the pic. I just copied the original. I cut it from a solid piece of poplar but you can use any wood you like. The original is just 3/4 plywood. The cleats are use to hold the floor in place.
Got it. Thanks. I'm working on my EBD and have done most of the PF, board work, and playing mechs. Your thread and pics progress has inspired me to go a little further and fix some of the cabinet issues. I have 23 machines, and EBD is my favorite.
You're currently viewing posts by Pinsider dgarrett.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/eight-ball-deluxe-restoration-thread?tu=dgarrett and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.