Eight Ball Deluxe Limited Edition
Bally, 1982I have an Eight Ball Deluxe LE and was wondering what the voltage measurements should be on the Power Transformer Board test points 1 thru 5. On my board, the test point voltages say:
TP1 - 6.3vdc - I measure 7.1 vdc
TP2 - 230vdc - I measure 240.8vdc
TP3 - 12vdc - I measure 17.3vdc
TP4 - 6.3vac - I measure 6.75vac
TP5 - 43vdc - I measure 45.3 vdc
Are my voltages too high? If so, what could cause this?
TIA
Transformers are imprecise your voltages are all within range, especially if you have some boards disconnected.
Quoted from slochar:Transformers are imprecise your voltages are all within range, especially if you have some boards disconnected.
Thank you!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/eight-ball-deluxe-power-transformer-module-voltages?hl=bigal56 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
