Isn't Jeff the Pinball Pimp, or is there more than one Jeff making stencils ?

Just ordered mine. You’ve been cranking out all the right titles lately. Only one left I need, is Dolly Parton.

I read in an earlier post that someone clear coated their brand new cpr playfield. Why ? Is cpr's clear that bad? Worse than the original Bally playfield?

Also, why do some people change out the 555 style lampholders for the older bayonet? I would have thought the bayonets would have been worse.

This recent post may be useful. Mentions someone who sells them.

https://pinside.com/pinball/forum/topic/installing-bell-posts-in-new-plastics#post-6045732

Have any EBD owners replaced these Molex connectors? If so, where'd you get them? Mine are getting the green slime pretty bad. Thanks.

20210125_003140 (resized).jpg

20210125_003211 (resized).jpg

I can't remember what thread it was, but I read this past week about some quality control issues with their playfields. I have never bought one, so I cannot attest to the statements that were made. You may want to do a search on it and read up on them. I was also curious how their playfields were, compared to CPR's.

Finished with my CPR playfield swap and led install. I want to tone down some of the GI lights at the top, as they are too bright for my senses. I do like the rest of the lighting with them. Has anyone used rubber bulb caps, ala old school to cover, or just go with a different bulb? Compare how bright it is next to the incandescent Dolly lights.

20210125_165829 (resized).jpg

20210125_165942 (resized).jpg

Curious about the people installing these under playfield connectors - since you've owned the game, how many times has this been an issue of needing to remove the drop target assembly? Short of a one time playfield swap, or replacing a broken drop target, why are you doing this mod? Seems like a lot of work for what?

Do the coils fire in test mode?