Hello,
Would like to join. Looking for an Eight Ball deluxe. I am in Maryland 20794.
Thank You
Andy
You're currently viewing posts by Pinsider alimerick.
Click here to go back to viewing the entire thread.
Thank You I e-mailed richmond craiglist. Looking for a Eight Ball Deluxe. Looking for one that is at least complete with all wiring, transformer, playfield parts.
Thank You
Nicely Done.
Quoted from Teddy:Finished the Pinball Pimp stencil on the cabinet. Really stoked with how well it turned out!
I'll finish the head this weekend.
Thank You PM sent for one. Still curious which version is closer to correct? Yellow or Beige?
Happy Holidays
Andy
Hunting for a few odd pieces 1980 EBD cabinet head parts. Metal Plate inside head. Head lock goes through outside of head and through this plate inside with the bolt on the lock shaft tightened against. Also lock is grounded with this plate.
Inside head metal brackets lamp and sound card mount to that are not stripped.
Any info appreciated.
Thank You
Andy
Good morning,
Going through EBD. Would anyone have a source for or perhaps have a used "button spacer S-2056" This is the spacer on"push button assembly A-1729-17". Spacer inside the coin door on the Start button shaft.
Thank You
Andy
Added over 7 years ago: For the EBD coin door start button spacer. Could someone provide height measurement? Could try to make something.
Thank You
Added over 7 years ago: Height of button spacer S-2056 is 3/8"
What was the original EBD1980 coin door setup? Did game come with 2 quarter slots and a middle SBA slot? Was the Bally coin door decal SBA or regular? Have seen it so many ways not sure?
Thank You
What F2K said! 2 diodes, 3 terminal on the coils in that circuit. If not after correction can replace Q 13 on the driver board.
Hello,
Have a pole for EBD Pinitech UNO white led displays.
What would you choose?
https://pinside.com/pinball/forum/topic/eight-ball-deluxe-pinitech-displays-what-color
After having 2 well worn EBD's in the past that never worked right and then finding one with a NOS playfield that had been swapped in poorly, wrong coils, wrong wiring, missing parts etc. Tracking my time took just under a 100 hours to get this one working correctly with missing parts scrounged over the past year. Then George, gmkalos here on pinside
https://pinside.com/pinball/market/classifieds/ad/55126
Clear coated playfield. EBD was also upgraded with 1984 version light boards, flipper conversion away from linear. George did a wonderful job and it looks so nice. It is a keeper and I can not stop playing it.
Sorry about sideway pics but if I rotate them it stretches them.
EBD came with those bats. Ordered Bally bats from Pinball life. That will be 30 plus shipping please.
Are EBD 81 replacement wiring harnesses available? Specifically display harness. This harness is chewed up and covered with electrical tape in the large bundle. Looks like it has been pinched in back box door over time. Can go through and patch am sure but would rather replace. Turned on and displays are missing digits etc. moving the harness in the giant electrical tape bundle fixes this.
You're currently viewing posts by Pinsider alimerick.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/eight-ball-deluxe-owner-club-guests-welcome-as-well?tu=alimerick and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.