If you can't find one, then just bend a new one from stainless wire.
You're currently viewing posts by Pinsider vid1900.
Click here to go back to viewing the entire thread.
Quoted from mizzou:Part came. Looks like it will fit just fine. Only issue is one of the holes is still jammed with part of the old piece lodged in there. Doesn't come out when you try to push the new piece in. I'm guessing maybe a jeweler pick with a slight hammer tap? Any other ideas?
Use a small punch or Nailset and tap the broken piece till you see the bulge on the backside of the playfield (it's about 1/16" below the surface).
Use a sharp razor knife and cut the wood fibers so the piece can exit cleanly.
Finish tapping the part through until it can be gripped by ViceGrips.
You're currently viewing posts by Pinsider vid1900.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/eight-ball-deluxe-help-neededodd-problem?tu=vid1900 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.