^^yes, great info. There for ya' goldenboy232.

To add:
Another great 'trick' Steve Young showed me is to take a length of coat hangar a little longer than the bank. As you pull the rod out that runs thru the targets, follow right behind w/the coat hangar wire. That way all stays in place and then you can do one at a time w/out parts flying all over! : ) as you pull coat hangar out, follow thru w/the rod that you took out.

Great time to clean all switches also.

Patience is key. The first time is usually a bit tedious. My first time changing drop targets was on a Dimension. 20 drop targets...great way to learn. ; ) The more you do the Easier/faster you will be.

Enjoy!