Been working on my EBD on location for several days now. Found that I had a bad Altek Driver board. Got it replaced with the original that was working but I wanted them all new for location. Anyways I have replaced the MPU, Lamp, expander, new connectors, and transformer/power board. Got it all back together and I have no flipper power. My fuses are good and I don't really know what it could be. These weren't my problem to begin with haha. It was originally coils on the drop targets locking on blowing the fuse under the Playfield. Once I swapped the driver board with the old on that now works perfectly. Any suggestions on the flippers?